text.skipToContent text.skipToNavigation

MLWL143 2D/3D Profile Sensor

Disponible en stock
2D/3D Profile Sensors project a laser line onto the object to be detected and generate an accurate, linearized height profile with an internal camera which is set up at a triangulation angle. Thanks to its uniform, open interface, the weCat3D series can be incorporated by means of the DLL program library or the GigE Vision standard without an additional control unit. Alternatively, wenglor offers its own software packages for implementing your application.

Caractéristiques optiques

Plage de travail Z 215 ... 475 mm
Plage de mesure Z 260 mm
Plage de mesure X 150 ... 230 mm
Ecart de linéarité 65 µm
Résolution Z 9,6 ... 22 µm
Résolution X 79 ... 120 µm
Type de lumière Laser (rouge)
Longueur d'onde 660 nm
Durée de vie (Tu = +25 °C) 20 000 h
Classe laser (EN 60825-1) 3R

Conditions ambiantes

Température ambiante 0 ... 45 °C
Température de stockage -20 ... 70 °C
Lumière parasite max. 5 000 Lux
CEM DIN EN 61000-6-2; 61000-6-4
Résistance aux chocs selon DIN CEI 68-2-27 30 g / 11 ms
Résistance aux vibrations selon DIN CEI 60068-2-6 6 g (10...55 Hz)
Humidité de l’air 5...95 %, sans condensation

Electrical Data

Supply Voltage 18 ... 30 V DC
Current Consumption (Ub = 24 V) 300 mA
Measuring Rate 175 ... 6,000 /s
Subsampling 350 ... 6,000 /s
Inputs/Outputs 4
Switching Output Voltage Drop < 1.5 V
Switching Output/Switching Current 100 mA
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Interface Ethernet TCP/IP
Transmission rate 100/1000 Mbit/s
Protection Class III
FDA Accession Number 1710275-000

Mechanical Data

Housing Material Aluminum, anodised
Degree of Protection IP67
UL Enclosure Type 1
Connection M12 × 1; 12-pin
Type of Connection Ethernet M12 × 1; 8-pin, X-cod.
Optic Cover Glass
Poids 2 830 g

Données générales

Serveur web oui

Sortie

Push-Pull oui

Paramètres réglables

Sortie Push-pull
NPN
PNP
Circuit Ouverture
Ouverture / Fermeture
Fermeture
All other parameters can be found in the product documentation.

Standards and certificates

B_SYM_UKCA_01.pdf B_SYM_UKCA_01.pdf B_SYM_UKCA_01.pdf B_SYM_UKCA_01.pdf B_SYM_UKCA_01.pdf B_SYM_UKCA_01.pdf

Connection Diagram

Champ de mesure X, Z

Z = distance de travail
X = Plage de mesure

Panneau

20 = Touche Entrée
22 = Touche Haut
23 = Touche Bas
60 = Affichage
4a = LED utilisateur
68 = LED d’alimentation
78 = Etat du module
85 = LED Liaison/Transfert

Dimensioned Picture

Dimensions en mm (1 mm = 0,03937 pouce)
1 = Recommended mounting position based on the sensor's center of gravity

Produits complémentaires

  • Unité de Contrôle
  • Switch EHSS001
  • Module de refroidissement ZLWK003
  • Support de vitre de protection ZLWS003
  • Logiciel
  • Câble de connexion
  • Contrôleur de vision industrielle MVC
  • 1(current)
  • 2
  • 3
Comparaison des produits