Features at a Glance
- Stainless steel housing
- Digital and analog output
- Synchronous and multiplex mode
- IO-Link 1.1
- Switching output adjustable via teach-in button
U18T003 Distance Sensor
Available from stock
Added to Your Cart:
These ultrasonic sensors evaluate the sound reflected from the object. They are capable of detecting almost any object, regardless of material and condition. As such, they are especially well suited for monitoring fill levels of liquids and bulk goods and for detecting transparent objects. The measured value can be read out via IO-Link, and the sensor can be adapted as needed to the application. The sensor can be used in reflex mode operation and as an ultrasonic through-beam sensor.
Ultrasonic Data | |
|---|---|
| Working range, reflex sensor | 50 ... 600 mm |
| Working range, through-beam sensor | 50 ... 1,200 mm |
| Setting Range | 50 ... 600 mm |
| Reproducibility maximum | 1 mm |
| Linearity Deviation | 2 mm |
| Resolution | 1 mm |
| Ultrasonic Frequency | 300 kHz |
| Service Life (T = +25 °C) | 100,000 h |
| Switching Hysteresis | 2 % * |
Electrical Data | |
|---|---|
| Supply Voltage | 18 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 40 mA |
| Switching frequency, reflex sensor | 9 Hz |
| Switching frequency, through-beam sensor | 9 Hz |
| Response time, reflex sensor | 56 ms |
| Response time, through-beam sensor | 56 ms |
| Temperature Drift | < 1 % |
| Temperature Range | -30 ... 60 °C |
| Number of Switching Outputs | 1 |
| Switching Output Voltage Drop | < 2.5 V |
| Switching Output/Switching Current | 100 mA |
| Analog Output | 4...20 mA |
| Synchronous Mode | Up to 32 sensors |
| Multiplex Mode | up to 16 sensors |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Lockable | yes |
| Interface | IO-Link V1.1 Smart Sensor Profile |
| Data Storage | yes |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Setting Method |
IO-Link Teach input (for switching output) |
| Housing Material | Stainless steel, V2A (1.4305 / 303) |
| Sensing face |
Epoxy resin/glass bubble mixture Plastic, PBT Silicone |
| Degree of Protection | IP67 |
| Connection | M12 × 1; 4/5-pin |
| Weight | 38 g |
Safety-relevant Data | |
|---|---|
| MTTFd (EN ISO 13849-1) | 1,122.83 a |
Output | |
|---|---|
| PNP NO/NC switchable | yes |
| Analog Output | yes |
| IO-Link | yes |
Adjustable parameters | |
|---|---|
| Circuit |
NC NC/NO NO |
| All other parameters can be found in the product documentation. |
Standards and certificates |
|---|
|
|
* Relative to switching distance, at least 1 mm
Connection Diagram |
|---|
|
|
Characteristic response curve |
|---|
|
Characteristic curves show the position of the center of the measured object (100 × 100 mm plate) at the time of switching.
Ob = Object
Sc = Sonic cone width
 Standard sonic cone (center of the measured object) Extra-narrow sonic cone (center of the measured object) Standard sonic cone (front edge of the measured object) |
| Characteristic response curve |
|---|
|
Characteristic curves show the position of the center of the measured object (Ø 25 mm rod) at the time of switching.
Ob = Object
Sc = Sonic cone width
Standard sonic cone (center of the measured object)Extra-narrow sonic cone (center of the measured object) |
Ctrl. Panel |
|---|
|
01 = Switching Status Indicator
06 = Teach Button 79 = Run/Error Indicator |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Sensing Face
|
Complementary Products |
|---|
|
Product Highlights
This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
