Features at a Glance
- Condition monitoring
- IO-Link 1.1
- Special for glass, PET and films
- No blind spot from single-lens optics
P1KK006 Retro-Reflex Sensor for Transparent Objects
Available from stock
Added to Your Cart:
The retro-reflex sensor for transparent objects works with red light and a reflector. Where conventional retro-reflex light barriers reach their limits, this retro-reflective barrier for clear glass recognition ensures that extremely shiny objects like glass, PET bottles, trays or film can be detected. Via the single-lens optic without blind spots, the sensor can detect objects even through small holes and gaps. The IO-Link interface can be used to configure retro-reflective barriers (PNP/NPN, NC/NO, switching distance), as well as for reading out switching statuses and signal values.
Optical Data | |
|---|---|
| Range | 1,500mm |
| Reference Reflector/Reflector Foil | RQ100BA |
| Clear Glass Recognition | yes |
| Smallest Recognizable Part | see Table 2 |
| Switching Hysteresis | < 5% |
| Light Source | Red Light |
| Polarization Filter | yes |
| Service Life (T = +25 °C) | 100,000h |
| Max. Ambient Light | 10,000Lux |
| Light Spot Diameter | see Table 1 |
| Single-Lens Optic | yes |
Electrical Data | |
|---|---|
| Supply Voltage | 10 ... 30V DC |
| Supply Voltage with IO-Link | 18 ... 30V DC |
| Current Consumption (Ub = 24 V) | < 20mA |
| Switching Frequency | 2,000Hz |
| Switching frequency (speed mode) | 3,500Hz |
| Response Time | 0.25ms |
| Response time (speed mode) | 0.14ms |
| Temperature Drift | < 5% |
| Temperature Range | -40 ... 60°C |
| Switching Output Voltage Drop | < 2V |
| Switching Output/Switching Current | 100mA |
| Residual Current Switching Output | < 50µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Lockable | yes |
| Interface | IO-Link V1.1 |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Setting Method | Potentiometer |
| Housing Material | Plastic, ABS/PC |
| Degree of Protection |
IP67 IP68 |
| Connection | Cable; 4-wire |
| Cable length (L) | 2m |
| Cable Jacket Material | PVC |
| Wire cross-section | 0.14mm² |
| Optic Cover | Plastic, PMMA |
| Weight | 45g |
Safety-relevant Data | |
|---|---|
| MTTFd (EN ISO 13849-1) | 2,414a |
General Data | |
|---|---|
| Scope of delivery |
1 × initial start-up instructions 1 × sensor |
Output | |
|---|---|
| IO-Link | yes |
| NPN NC, NPN NO | yes |
Adjustable parameters | |
|---|---|
| Output |
Push-pull NPN PNP |
| Circuit |
inactive Error output NC+NO NO |
| Other parameters |
Off-delay On-delay Mode of operation Hysteresis Switching point |
| All other parameters can be found in the product documentation. |
Standards and certificates |
|---|
|
|
Illustration similar
Table 1 |
|||
|---|---|---|---|
| Working Distance | 0,2 m | 1 m | 1,5 m |
| Light Spot Diameter | 20 mm | 90 mm | 130 mm |
| Table 2 | |||
|---|---|---|---|
| Distance, Sensor to Reflector | 0,2 m | 1 m | 1,5 m |
| Smallest Recognizable Part | 0,7 mm | 6 mm | 10 mm |
Connection Diagram |
|---|
|
|
Ctrl. Panel |
|---|
|
05 = Switching Distance Adjuster
30 = Switching Status/Contamination Warning 68 = Power LED |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Optical axis
Screw M3 = 0,5 Nm
|
Reflector data | |
|---|---|
| RQ100BA | 0 ... 1.5m |
| RE18040BA | 0 ... 1.5m |
| RQ84BA | 0 ... 1.5m |
| RR84BA | 0 ... 1.5m |
| RE9538BA | 0 ... 0.7m |
| RE6151BM | 0 ... 1.3m |
| RR50_A | 0 ... 1.5m |
| RE6040BA | 0 ... 1.4m |
| RE8222BA | 0 ... 1m |
| RR34_M | 0 ... 1m |
| RE3220BM | 0 ... 0.6m |
| RE6210BM | 0 ... 0.6m |
| RR25_M | 0 ... 0.7m |
| RR25KP | 0 ... 0.25m |
| RR21_M | 0 ... 0.6m |
| ZRAE02B01 | 0 ... 0.6m |
| ZRME01B01 | 0 ... 0.25m |
| ZRME03B01 | 0 ... 0.65m |
| ZRMR02K01 | 0 ... 0.4m |
| ZRMS02_01 | 0 ... 0.55m |
| RF505 | 0 ... 0.5m |
| RF508 | 0 ... 0.5m |
| RF258 | 0 ... 0.45m |
| ZRDF03K01 | 0 ... 1.1m |
| ZRDF10K01 | 0 ... 1.2m |
Complementary Products |
|---|
|
ECAD data
Product Highlights
This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
