Features at a Glance
- MultiCore technology
- Reading of printed and directly marked 1D and 2D codes
C50C102 1D/2D Code Scanner
Usually ready to ship in 15 days after order is received.
Added to Your Cart:
The scanner weQubeDecode is based on the wenglor MultiCore technology. Omnidirectional scanning enables decoding of printed, needle-punched, laser-engraved or etched codes on various materials in any orientation. Good scanning results are even obtained with poor code quality. In addition to the established 1D codes it is also suitable for scanning various 2D codes. A list of readable code types is found in the operating instructions.
Optical Data | |
|---|---|
| Working Range | ≥ 20 mm |
| Resolution | 736 × 480 Pixel |
| Resolution | 0.35 MP |
| Image Chip | monochrome |
| Image chip size | 1/3" |
| Pixel Size | 6 × 6 µm |
| Light Source | Red Light |
| Optics | Auto-focus |
| Visual Field | see Table 1 |
| min. Resolution | 0.1 mm |
| Barcode Printing Contrast | > 15 % |
| Minimum object distance | 20 mm |
Environmental conditions | |
|---|---|
| Temperature Range | -25 ... 55 °C* |
| Atmospheric humidity | 5...95%, non-condensing |
Electrical Data | |
|---|---|
| Supply Voltage | 18 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 200 mA |
| Scan Rate | 20 scans/sec |
| Inputs/Outputs | 6 |
| Switching Output Voltage Drop | < 2.5 V |
| Switching Output/Switching Current | 100 mA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Interface | RS-232/Ethernet |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Housing Material | Aluminum, anodised |
| Degree of Protection | IP67 |
| Connection | M12 × 1; 12-pin |
| Type of Connection Ethernet | M12 × 1; 8-pin, X-cod. |
| Optic Cover | Plastic, PMMA |
| Weight | 301 g |
Safety-relevant Data | |
|---|---|
| MTTFd (EN ISO 13849-1) | 227.7 a |
General Data | |
|---|---|
| Web server | yes |
| License package | weQubeDecode |
Function | |
|---|---|
| 1D and 2D code reading | yes |
Output | |
|---|---|
| PNP NO | yes |
| Illumination Output | yes |
| RS-232 Interface | yes |
| Ethernet | yes |
| PROFINET I/O, CC-A | yes |
| EtherNet/IP™ | yes |
Adjustable parameters | |
|---|---|
| Output |
Push-pull NPN PNP |
| Circuit |
NC NC/NO NO |
Standards and certificates |
|---|
|
|
Display brightness may decrease with age. This does not result in any impairment of the sensor function.
* –25 °C: Ambient conditions should not result in condensation; avoid the formation of ice on the front panel!
55 °C: Continuous illumination at max. 1% or flash mode at 100% brightness with an exposure time of <= 5 ms; may affect the service life of the product.
Table 1 |
|||
|---|---|---|---|
| Working Distance | 20 mm | 100 mm | 200 mm |
| Visual Field | 9 × 6 mm | 65 × 42 mm | 134 × 87 mm |
Connection Diagram |
|---|
|
|
Scanning Field Table |
|---|
|
AK = Outer Edge
IK = Inner Edge LA = Read Range SB = Scan Width TSA = Depth of Focus Outer Edge TSI = Depth of Focus Inner Edge |
| Connection options |
|---|
|
for L series illumination
|
| Connection options |
|---|
|
for ZVZF series illumination
|
Ctrl. Panel |
|---|
|
20 = Enter key
22 = Up key 23 = Down key 60 = display |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
|
Complementary Products |
|---|
|
ECAD data
Soft- and Firmware
Example_Omron_EtherNetIP_weQube_1.0.2.zip
Example_Rockwell_EtherNetIP_weQube_1.0.2.zip
Example_Rockwell_TCP_UDP_uniVision_1.0.0.zip
Example_TIA_PROFINET_weQube_1.0.2.zip
Example_TIA_TCP_UDP_uniVision_1.0.0.zip
Example_TwinCAT3_EtherNETIP_weQube_1.0.2.zip
Example_TwinCAT3_PROFINET_weQube_1.0.2.zip
Example_TwinCAT3_TCP_UDP_uniVision_1.0.0.zip
Firmware_weQube_2.6.1.tgz
Software_uniVision_2.6.1.exe
Interface protocol
Product Highlights
This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
