Features at a Glance
- Data storage
- Two independent switching outputs
- High-end
- Robust stainless steel housing with IP69K
P2KH024 Reflex Sensor with Background Suppression
Available from stock
Added to Your Cart:
The reflex sensor with background suppression works with red light according to the angle measurement principle. It has an IO-Link interface with a data storage function as well as additional configuration and diagnostic options. The interface can also be used to configure the sensors (PNP/NPN, NC/NO, switching distance, error output), as well as for reading out switching statuses and distance values. Two independent switching outputs can be used, for instance, to monitor minimum and maximum values of distances or fill levels and stack heights. The robust V4A (1.4404/316L) stainless steel housing is resistant to oils and coolants, as well as cleaning agent.
Optical Data | |
|---|---|
| Range | 200 mm |
| Setting Range | 30 ... 200 mm |
| Switching Hysteresis | < 10 % |
| Light Source | Red Light |
| Service Life (T = +25 °C) | 100,000 h |
| Max. Ambient Light | 10,000 Lux |
| Light Spot Diameter | see Table 1 |
Electrical Data | |
|---|---|
| Supply Voltage | 15 ... 30 V DC |
| Supply Voltage with IO-Link | 18 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 20 mA |
| Switching Frequency | 100 Hz |
| Switching Frequency (1 Switching Output) | 1,000 Hz |
| Response Time | 5 ms |
| Response time (1 switching output) | 0.5 ms |
| Temperature Drift | < 5 % |
| Temperature Range | -40 ... 60 °C |
| Number of Switching Outputs | 2 |
| Switching Output Voltage Drop | < 2 V |
| Switching Output/Switching Current | 100 mA |
| Residual Current Switching Output | < 50 µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Lockable | yes |
| Interface | IO-Link V1.1 |
| Data Storage | yes |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Setting Method | Teach-In |
| Housing Material | Stainless steel, V4A (1.4404 / 316L) |
| Degree of Protection | IP68/IP69K |
| Connection | M8 × 1; 4-pin |
| Optic Cover | Plastic, PMMA |
| Ecolab | yes |
| Weight | 42 g |
Safety-relevant Data | |
|---|---|
| MTTFd (EN ISO 13849-1) | 1,496.09 a |
Output | |
|---|---|
| NPN NO | yes |
| IO-Link | yes |
Adjustable parameters | |
|---|---|
| Output |
Push-pull NPN PNP |
| Circuit |
NC NC/NO NO |
| Other parameters |
Off-delay On-delay Mode of operation Hysteresis Switching point Emitted light |
| All other parameters can be found in the product documentation. |
Standards and certificates |
|---|
|
|
Table 1 |
|||
|---|---|---|---|
| Detection Range | 30 mm | 120 mm | 200 mm |
| Light Spot Diameter | 9 mm | 7 mm | 13 mm |
Connection Diagram |
|---|
|
|
Switching Distance Deviation |
|---|
|
Typical characteristic curve based on white, 90 % remission
Sr = Switching Distance
dSr = Switching Distance Change
 black 6 % remission grey 18 % remission |
Ctrl. Panel |
|---|
|
68 = supply voltage indicator
06 = Teach Button 5a = Switching Status Indicator, A1 6a = Switching Status Indicator, A2 |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode
2 = Receiver Diode
Screw M3 = 0,5 Nm
M8 × 1 plug without snap lock |
Complementary Products |
|---|
|
Product Highlights
This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
