text.skipToContent text.skipToNavigation

U1RT004 测距传感器

Available from stock
这些超声波传感器用来分析物体反射的声波。它们几乎能够识别所有物体,不受材料及其特性的影响。由于采用了创新型声波检测头,该传感器在近距离范围内拥有一个特别宽的声束。因此可以可靠识别输送带上的不同散料。该传感器只能用于探测模式。

Ultrasonic Data

Working range, reflex sensor 80 ... 400 mm
Reproducibility maximum 1 mm
Linearity Deviation 3 mm
Resolution 0.5 mm
Ultrasonic Frequency 300 kHz
Opening Angle < 14 °
Service Life (T = +25 °C) 100,000 h
Switching Hysteresis 2 mm

Electrical Data

Supply Voltage 18 ... 30 V DC
Current Consumption (Ub = 24 V) < 30 mA
Switching frequency, reflex sensor 20 Hz
Response time, reflex sensor 25 ms
Temperature Range -30 ... 60 °C
Number of Switching Outputs 1
Switching Output Voltage Drop < 2.5 V
Switching Output/Switching Current 100 mA
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Interface IO-Link V1.1
Data Storage yes
Protection Class III

Mechanical Data

Setting Method IO-Link
Housing Material Plastic, PBT
Plastic, ABS
Brass, nickel-plated
Sensing face Epoxy resin/glass bubble mixture
Plastic, PBT
Plastic, PU
Degree of Protection IP67
IP68
Connection M12 × 1; 4-pin
Weight 29 g

Safety-relevant Data

MTTFd (EN ISO 13849-1) 1,369.42 a

Output

PNP NO yes
IO-Link yes

Adjustable parameters

Output NPN
PNP
Circuit NC
NC/NO
NO
Other parameters Teach mode
Through-beam mode
All other parameters can be found in the product documentation.

Standards and certificates

B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf

Connection Diagram

Characteristic response curve

Characteristic curves show the position of the center or the front edge of the measured object (100 × 100 mm plate) at the time of switching.
Ob = Object
Sc = Sonic cone width
Standard sonic cone (center of the measured object)
Standard sonic cone (front edge of the measured object)
Characteristic response curve
Characteristic curves show the position of the center or the front edge of the measured object (Ø 25 mm rod) at the time of switching.
Ob = Object
Sc = Sonic cone width
Standard sonic cone (center of the measured object)

Ctrl. Panel

3b = switching status display/error display/function display

Dimensioned Picture

Dimensions specified in mm (1 mm = 0.03937")

Complementary Products

  • IO-Link Master
Product Comparison
Persona de contacto ¿Tiene alguna pregunta?