text.skipToContent text.skipToNavigation
Laserdistanzsensor ToF P1PY111

Features at a Glance

  • 2 mutually independent switching outputs
  • Wide working range and precise detection thanks to DS technology
  • No interactive influence
  • Built-in acceleration sensor

P1PY111 Laserdistanzsensor ToF

Available from stock
Diese Sensoren arbeiten nach dem Prinzip der Lichtlaufzeitmessung mit Laserklasse 1. Der wintec mit "Dynamic Sensitivity"-Technologie (DS) ermöglicht eine bisher unerreichte Empfangsempfindlichkeit auch bei sehr schwachen Signalen. Dadurch verfügen die Sensoren über einen großen Arbeitsbereich bis zu 10 m und können dunkle oder glänzende Objekte auch in extremer Schräglage sicher erkennen. Der wintec arbeitet zudem sehr zuverlässig in störenden Umgebungsbedingungen wie z. B. durch Fremdlicht oder Verschmutzungen. Umfangreiche Condition-Monitoring-Funktionen ermöglichen zusätzlich eine vorausschauende Wartung und einen störungsfreien Betrieb.

Optical Data
Working Range 0 ... 10,000 mm
Setting Range 50 ... 10,000 mm
Reproducibility maximum 3 mm*
Linearity Deviation 10 mm*
Switching Hysteresis  < 15 mm
Light Source Laser (red)
Wavelength 660 nm
Service Life (T = +25 °C) 100,000 h
Laser Class (EN 60825-1) 1
Beam Divergence < 2 mrad
Max. Ambient Light 100,000 Lux
Light Spot Diameter see Table 1
Reflector required no

Electrical Data
Supply Voltage 18 ... 30 V DC
Current Consumption (Ub = 24 V) < 35 mA
Switching Frequency 50 Hz*
Switching Frequency (max.) 250 Hz*
Response Time 15 ms *
Response Time (min.) 4.7 ms *
Temperature Drift < 0.4 mm/K
Temperature Range -40 ... 50 °C
Number of Switching Outputs 2
Switching Output Voltage Drop < 2.5 V
Switching Output/Switching Current 100 mA
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Interface IO-Link V1.1
IO-Link transmission speed COM3
Protection Class III
FDA Accession Number 2110079-001

Mechanical Data
Setting Method Teach-In
Housing Material Plastic, ABS
Optic Cover Plastic, PMMA
Degree of Protection IP67
IP68
Connection M12 × 1; 5-pin
Weight 41 g

Safety-relevant Data
MTTFd (EN ISO 13849-1) 543.26 a

Output
PNP NO yes
IO-Link yes
Acceleration sensor yes

Adjustable parameters
Output Error Output
Push-pull
NPN
PNP
Warning output
Circuit NC
NC/NO
NO
NC+NO
Other parameters Off-delay
On-delay
Acceleration sensor
Sensitivity
Filter
Unit of measure
Measuring mode
Emitted light
Sensor localization
Key illumination
Teach mode
All other parameters can be found in the product documentation.

Standards and certificates
B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf
* Depends on mode, see table 2

Table 1
Working Distance 0 m 5 m 10 m
Light Spot Diameter 5 mm 10 mm 15 mm

Table 2

Connection Diagram
B_ANS_0243.eps
- = supply voltage 0 V
+ = supply voltage +
E/A1 = programmable input/output / IO-Link
E/A2 = programmable input/output
E3 = input

Switching Distance Deviation
B_DIA_P1PY1xx_02.eps
Typical characteristic curve based on white, 90 % remission
Sr = Switching Distance
dSr = Switching Distance Change
black 6 % remission
grey 18 % remission

Ctrl. Panel
B_BED_A_43.eps
06 = Teach Button
68 = Power LED
5a = Switching Status Indicator, A1
6a = Switching Status Indicator, A2

Dimensioned Picture
B_BEM_P1PY101_01.tif
Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode 2 = Receiver Diode Screw M4 = 0.5 Nm

Complementary Products
  • IO-Link Master
  • Software
Product Comparison
3/4
4/4
5/4
6/4