Features at a Glance
- Stainless steel housing
- Synchronous mode
- Digital and analog output
- Temperature drift eliminable
UMD402U035 Distance Sensor
Usually ready to ship in 12 days after order is received.
Added to Your Cart:
These ultrasonic sensors evaluate the sound reflected from the object. They are capable of detecting almost any object, regardless of material and condition. Thanks to the innovative transducer, this sensor has a particularly wide sonic cone at close range. This means that many different kinds of pieces can be reliably detected on conveyor belts. The sensor can only be used in reflex mode operation.
This product has been discontinued, but is still available as a spare part.
Ultrasonic Data | |
|---|---|
| Working Range | 50 ... 400mm |
| Measuring Range | 350mm |
| Reproducibility maximum | 1mm |
| Linearity Deviation | 5mm |
| Resolution | 1mm |
| Ultrasonic Frequency | 300kHz |
| Opening Angle | < 12° |
| Service Life (T = +25 °C) | 100,000h |
| Switching Hysteresis | 2mm |
Electrical Data | |
|---|---|
| Supply Voltage | 18 ... 30V DC |
| Current Consumption (Ub = 24 V) | < 30mA |
| Switching Frequency | 20Hz |
| Response Time | 25ms |
| Temperature Range | -30 ... 60°C |
| Number of Switching Outputs | 1 |
| Switching Output Voltage Drop | < 2.5V |
| PNP Switching Output/Switching Current | 100mA |
| Analog Output | 0...10 V |
| Synchronous Mode | up to 40 sensors |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Lockable | yes |
| Interface | IO-Link V1.0 |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Setting Method |
IO-Link Teach input (for switching output) Teach-in (for switching output) |
| Housing Material | Stainless steel, V2A (1.4305 / 303) |
| Sensing face |
Epoxy resin/glass bubble mixture Plastic, PBT Silicone |
| Full Encapsulation | yes |
| Degree of Protection | IP67 |
| Connection | M12 × 1; 5-pin |
| Weight | 68g |
Safety-relevant Data | |
|---|---|
| MTTFd (EN ISO 13849-1) | 828.67a |
General Data | |
|---|---|
| Scope of delivery |
1 × initial start-up instructions 1 × MUTTER-M18-E003 hex nut 1 × sensor |
Output | |
|---|---|
| PNP NO/NC switchable | yes |
| Analog Output | yes |
| IO-Link | yes |
Adjustable parameters | |
|---|---|
| Circuit |
NC NC/NO NO |
| Other parameters | Synchronous mode |
| All other parameters can be found in the product documentation. |
Standards and certificates |
|---|
|
|
Connection Diagram |
|---|
|
|
Characteristic response curve |
|---|
|
Characteristic curves show the position of the center or the front edge of the measured object (100 × 100 mm plate) at the time of switching.
Ob = Object
Sc = Sonic cone width
 Standard sonic cone (center of the measured object) Extra-narrow sonic cone (center of the measured object) Standard sonic cone (front edge of the measured object) |
| Characteristic response curve |
|---|
|
Characteristic curves show the position of the center or the front edge of the measured object (Ø 25 mm rod) at the time of switching.
Ob = Object
Sc = Sonic cone width
Standard sonic cone (center of the measured object)Extra-narrow sonic cone (center of the measured object) |
Ctrl. Panel |
|---|
|
01 = Switching Status Indicator
06 = Teach Button 79 = Run/Error Indicator |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Sensing Face
|
Complementary Products |
|---|
|
ECAD data
Product Highlights
This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
