Features at a Glance
- Stainless steel plug (V2A)
- Switching frequency: 1 kHz
- With foreground suppression
OPT292 Reflex Sensor with Background Suppression
Available from stock
Added to Your Cart:
This product has been discontinued, but is still available as a spare part.
Optical Data | |
|---|---|
| Range | 300mm |
| Setting Range | 65 ... 300mm |
| Switching Hysteresis | < 1% |
| Light Source | Laser (red) |
| Wavelength | 655nm |
| Service Life (T = +25 °C) | 100,000h |
| Laser Class (EN 60825-1) | 2 |
| Max. Ambient Light | 10,000Lux |
| Light Spot Diameter | see Table 1 |
Electrical Data | |
|---|---|
| Supply Voltage | 10 ... 30V DC |
| Current Consumption (Ub = 24 V) | < 20mA |
| Switching Frequency | 1kHz |
| Response Time | 500µs |
| Temperature Drift | < 2% |
| Temperature Range | -25 ... 60°C |
| Switching Output Voltage Drop | < 2.5V |
| PNP Switching Output/Switching Current | 200mA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Setting Method | Potentiometer |
| Housing Material | Plastic, PBT |
| Degree of Protection | IP67 |
| Connection | M12 × 1; 4-pin |
| Weight | 38g |
Safety-relevant Data | |
|---|---|
| MTTFd (EN ISO 13849-1) | 1,930.46a |
General Data | |
|---|---|
| Scope of delivery |
1 × BEF-SET-02 mounting set 1 × initial start-up instructions 1 × laser warning sign 1 × sensor |
Output | |
|---|---|
| PNP NC, PNP NO | yes |
Adjustable parameters | |
|---|---|
| Circuit |
NC NC+NO NO |
| All other parameters can be found in the product documentation. |
Standards and certificates |
|---|
|
|
Table 1 |
|||
|---|---|---|---|
| Detection Range | 60 mm | 150 mm | 300 mm |
| Light Spot Diameter | 3 mm | 2 mm | 3 mm |
Connection Diagram |
|---|
|
|
Switching Distance Deviation |
|---|
|
Typical characteristic curve based on white, 90 % remission
Sr = Switching Distance
dSr = Switching Distance Change
 black 6 % remission grey 18 % remission |
Ctrl. Panel |
|---|
|
05 = Switching Distance Adjuster
30 = Switching Status/Contamination Warning |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode
2 = Receiver Diode
Screw M4 = 1 Nm
|
Complementary Products |
|---|
|
ECAD data
