UF66VCF3 Fiber-optic amplifier

Available from stock

Added to Your Cart:

Added to your request list:

These sensors are equipped for use with glass fiber optic cables but can be used with or without one. The transmitter and receiver are located in a single housing. The sensor evaluates transmitted light reflected back from the object and the output is switched as soon as an object passes the selected range. Bright objects reflect more light than dark objects, and can thus be recognized from greater distances.

Features at a Glance

Adaptable for glass fiber-optic cable
Recognition of small parts
Switching frequency: 5 kHz
Adjustable time delay

Technical data

Optical Data
Range	1,000 mm
Switching Hysteresis	< 15 %
Light Source	Infrared Light
Service Life (T = +25 °C)	100,000 h
Max. Ambient Light	10,000 Lux
Opening Angle	12 °

Electrical Data
Supply Voltage	10 ... 30 V DC
Current Consumption (Ub = 24 V)	< 40 mA
Switching Frequency	5 kHz
Response Time	100 µs
On-/Off-Delay	0 ... 1 s
Temperature Drift	< 10 %
Temperature Range	-10 ... 60 °C
Switching Output Voltage Drop	< 2.5 V
Switching Output/Switching Current	200 mA
Residual Current Switching Output	< 50 µA
Short Circuit Protection	yes
Reverse Polarity Protection	yes
Overload Protection	yes
Protection Class	III

Mechanical Data
Setting Method	Potentiometer
Housing Material	Brass, nickel-plated
Optic Cover	Plastic, PC
Full Encapsulation	yes
Degree of Protection	IP65
Connection	M12 × 1; 4-pin
Weight	138 g