Features at a Glance
- Robust stainless steel housing with IP69K
- Analog output 0…10 V
- No interactive influence
- Wide working range and precise detection thanks to DS technology
P2PY107 Laser Distance Sensor Time of Flight
Available from stock
Added to Your Cart:
The sensors function in accordance with the principle of transit time measurement with laser class 1. wintec with Dynamic Sensitivity technology (DS) enables previously unattainable reception sensitivity even with very weak signals. As a result, the sensors have a large working range of up to 10 m and can reliably detect dark or shiny objects even at extreme angles. wintec also works very reliably in adverse ambient conditions, such as those caused by ambient light or contamination. The robust 316L stainless steel housing (1.4404/V4A ) is resistant to oils, coolants, and cleaning agents.
Optical Data | |
|---|---|
| Working Range | 0 ... 10,000 mm |
| Measuring Range | 50 ... 10,000 mm |
| Reproducibility maximum | 3 mm |
| Linearity Deviation | 10 mm |
| Switching Hysteresis | < 15 mm |
| Light Source | Laser (red) |
| Wavelength | 660 nm |
| Service Life (T = +25 °C) | 100,000 h |
| Laser Class (EN 60825-1) | 1 |
| Beam Divergence | < 2 mrad |
| Max. Ambient Light | 100,000 Lux |
| Light Spot Diameter | see Table 1 |
| Reflector required | no |
Electrical Data | |
|---|---|
| Supply Voltage | 18 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 40 mA |
| Measuring Rate | 100 /s* |
| Measuring Rate (max.) | 500 /s* |
| Temperature Drift | < 0.4 mm/K |
| Temperature Range | -40 ... 55 °C |
| Analog Output | 0...10 V |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Interface | IO-Link V1.1 |
| Baud Rate | COM3 |
| Protection Class | III |
| FDA Accession Number | 2110079-001 |
Mechanical Data | |
|---|---|
| Setting Method | Teach-In |
| Housing Material | Stainless steel, V4A (1.4404 / 316L) |
| Optic Cover | Plastic, PMMA |
| Degree of Protection | IP68/IP69K |
| Connection | M12 × 1; 4/5-pin |
| Ecolab | yes |
| FDA compliant | yes |
| Weight | 276 g |
Safety-relevant Data | |
|---|---|
| MTTFd (EN ISO 13849-1) | 502.44 a |
Output | |
|---|---|
| Error Output | yes |
| Analog Output | yes |
| IO-Link | yes |
| Acceleration sensor | yes |
Adjustable parameters | |
|---|---|
| Output |
Error Output Push-pull NPN Warning output |
| Other parameters |
Off-delay On-delay Sensitivity Filter Unit of measure Measuring mode Emitted light Sensor localization Teach mode |
| All other parameters can be found in the product documentation. |
Standards and certificates |
|---|
|
|
* Depends on mode, see table 2
Table 1 |
|||
|---|---|---|---|
| Working Distance | 0 m | 5 m | 10 m |
| Light Spot Diameter | 5 mm | 10 mm | 15 mm |
Table 2 |
|---|
|
|
Connection Diagram |
|---|
|
- = supply voltage 0 V
+ = supply voltage + E/A1 = programmable input/output / IO-Link E3 = input O = analog output |
Ctrl. Panel |
|---|
|
06 = Teach Button
68 = supply voltage indicator 5a = Switching Status Indicator, A1 12 = Analog Output Indicator |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode
2 = Receiver Diode
Screw M4 = 1 Nm
|
Complementary Products |
|---|
|
ECAD data
Product Highlights
This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
