text.skipToContent text.skipToNavigation

Laser Distance Sensor Time of Flight P1PY103

Features at a Glance

2 mutually independent switching outputs
Wide working range and precise detection thanks to DS technology
No interactive influence
Intuitive operating concept

P1PY103 Laser Distance Sensor Time of Flight

Usually ready to ship in 25 days after order is received.

Added to Your Cart:

Added to your request list:

The sensors function in accordance with the principle of transit time measurement with laser class 1. wintec with Dynamic Sensitivity technology (DS) enables previously unattainable reception sensitivity even with very weak signals. As a result, the sensors have a large working range of up to 10 m and can reliably detect dark or shiny objects even at extreme angles. wintec also works very reliably in adverse ambient conditions, such as those caused by ambient light or contamination. Extensive condition monitoring functions also enable predictive maintenance and trouble-free operation.

Features at a Glance

2 mutually independent switching outputs
Wide working range and precise detection thanks to DS technology
No interactive influence
Intuitive operating concept

Technical data

Optical Data
Working Range	0 ... 10,000 mm
Setting Range	50 ... 10,000 mm
Reproducibility maximum	3 mm*
Linearity Deviation	10 mm*
Switching Hysteresis	< 15 mm
Light Source	Laser (red)
Wavelength	660 nm
Service Life (T = +25 °C)	100,000 h
Laser Class (EN 60825-1)	1
Beam Divergence	< 2 mrad
Max. Ambient Light	100,000 Lux
Light Spot Diameter	see Table 1
Reflector required	no

Electrical Data
Supply Voltage	18 ... 30 V DC
Current Consumption (Ub = 24 V)	< 35 mA
Switching Frequency	50 Hz*
Switching Frequency (max.)	250 Hz*
Response Time	15 ms *
Response Time (min.)	4.7 ms *
Temperature Drift	< 0.4 mm/K
Temperature Range	-40 ... 50 °C
Number of Switching Outputs	2
Switching Output Voltage Drop	< 2.5 V
Switching Output/Switching Current	100 mA
Short Circuit Protection	yes
Reverse Polarity Protection	yes
Overload Protection	yes
Interface	IO-Link V1.1
Baud Rate	COM3
Protection Class	III
FDA Accession Number	2110079-001

Mechanical Data
Setting Method	Teach-In
Housing Material	Plastic, ABS
Optic Cover	Plastic, PMMA
Degree of Protection	IP67/IP68
Connection	M12 × 1; 4/5-pin
Weight	41 g

Safety-relevant Data
MTTFd (EN ISO 13849-1)	547.59 a

Output
NPN NO	yes
IO-Link	yes

Adjustable parameters
Output	Error Output Push-pull NPN PNP Warning output
Circuit	NC NC/NO NC+NO NO
Other parameters	Off-delay On-delay Filter Unit of measure Measuring mode Emitted light Sensor localization Key illumination Teach mode Sensitivity
All other parameters can be found in the product documentation.

Standards and certificates

* Depends on mode, see table 2

Table 1
Working Distance	0 m	5 m	10 m
Light Spot Diameter	5 mm	10 mm	15 mm

Table 2

Connection Diagram
- = supply voltage 0 V + = supply voltage + E/A1 = programmable input/output / IO-Link E/A2 = programmable input/output E3 = input

Switching Distance Deviation
Typical characteristic curve based on white, 90 % remission Sr = Switching Distance dSr = Switching Distance Change black 6 % remission grey 18 % remission

Ctrl. Panel
06 = Teach Button 68 = supply voltage indicator 5a = Switching Status Indicator, A1 6a = Switching Status Indicator, A2

Dimensioned Picture
Dimensions specified in mm (1 mm = 0.03937") 1 = Transmitter Diode 2 = Receiver Diode Screw M4 = 0.5 Nm

Complementary Products
IO-Link Master Software

Downloads

EPLAN-Portal

IODD_P1PY103_V1.1.zip

Interface_Protocol_IO-Link_Parameter_Process_Data_PxPY10x.pdf

P1PY1_Manufacturer_declaration.pdf

Applications

**Rack-Occupied Message in Hanging Garment Shuttles with Laser Distance Sensors**

**Collision Protection of Overhead Tracks with Laser Distance Sensors Time of Flightin the Automotive Industry**

**Position Control of Components at Manual Workstations via Laser Distance Sensors Time of Flight**

**Collision Prevention of Gantry Loaders with Laser Distance Sensors Time of Flight**

**Distance Measurement of Chipboards with Laser Distance Sensors Time of Flight with wintec**

**Distinguishing Different Car Body Parts in Automotive Production with Laser Distance Sensors Time of Flight**

**Stack Height Measurement of Wooden Panels in Stack Storage Systems with Laser Distance Sensors**

**Rack Occupied Message in Shuttles of High-Bay Warehouses with Laser Distance Sensors Time of Flight**

**Stack Height Detection of Roof Tiles with Laser Distance Sensors Time of Flight**

**Obstruction Detection for Driverless Transport Systems (DTS) with Time-of-Flight Laser Distance Sensors**

**Monitoring Empty Trays at the Airport with Laser Distance Sensor Time-of-Flight**

**Presence Check of Suitcases with Long-Range Laser Distance Sensor**

**Clearance Check When Repositioning Bottles on Conveyor Belts Using Laser Distance Sensor Time of Flight with wintec**

**Presence Check of Transparent Food Trays with Laser Distance Sensors Time of Flight**

**Presence Check of Red-Hot Steel Tubes with Laser Distance Sensors Time of Flight**

**Presence Check of Fabric Panels in Rear Body Cells in the Automotive Industry Using Laser Distance Sensors Time of Flight**

**Presence and Position Detection of Painted Car Doors with Laser Distance Sensors Time of Flight**

Product Highlights

This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.