Features at a Glance
- Stainless steel housing
- Digital and analog output
- Temperature drift eliminable
- Synchronous mode
UMD123U035 Distance Sensor
Available from stock
Added to Your Cart:
These ultrasonic sensors evaluate the sound reflected from the object. They are capable of detecting almost any object, regardless of material and condition. Thanks to the innovative transducer, this sensor has a particularly wide sonic cone at close range. This means that many different kinds of pieces can be reliably detected on conveyor belts. The sensor can only be used in reflex mode operation.
Ultrasonic Data | |
|---|---|
| Working Range | 100 ... 1,200 mm |
| Measuring Range | 1,100 mm |
| Reproducibility maximum | 2 mm |
| Linearity Deviation | 7 mm |
| Resolution | 1 mm |
| Ultrasonic Frequency | 240 kHz |
| Opening Angle | < 12 ° |
| Service Life (T = +25 °C) | 100,000 h |
| Switching Hysteresis | 10 mm |
Electrical Data | |
|---|---|
| Supply Voltage | 18 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 30 mA |
| Switching Frequency | 7 Hz |
| Response Time | 72 ms |
| Temperature Range | -30 ... 60 °C |
| Number of Switching Outputs | 1 |
| Switching Output Voltage Drop | < 2.5 V |
| PNP Switching Output/Switching Current | 100 mA |
| Analog Output | 0...10 V |
| Synchronous Mode | up to 40 sensors |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Lockable | yes |
| Interface | IO-Link V1.0 |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Setting Method |
IO-Link Teach input (for switching output) |
| Housing Material | Stainless steel, V2A (1.4305 / 303) |
| Sensing face |
Epoxy resin/glass bubble mixture Plastic, PBT Silicone |
| Full Encapsulation | yes |
| Degree of Protection | IP67 |
| Connection | M12 × 1; 4/5-pin |
| Weight | 71 g |
Safety-relevant Data | |
|---|---|
| MTTFd (EN ISO 13849-1) | 829.12 a |
Output | |
|---|---|
| PNP NO/NC switchable | yes |
| Analog Output | yes |
| IO-Link | yes |
Adjustable parameters | |
|---|---|
| Circuit |
NC NO |
| Other parameters |
Offset Synchronous mode |
| All other parameters can be found in the product documentation. |
Standards and certificates |
|---|
|
|
Connection Diagram |
|---|
|
|
Characteristic response curve |
|---|
|
Characteristic curves show the position of the center or the front edge of the measured object (100 × 100 mm plate) at the time of switching.
Ob = Object
Sc = Sonic cone width
 Standard sonic cone (center of the measured object) Extra-narrow sonic cone (center of the measured object) Standard sonic cone (front edge of the measured object) |
| Characteristic response curve |
|---|
|
Characteristic curves show the position of the center or the front edge of the measured object (Ø 25 mm rod) at the time of switching.
Ob = Object
Sc = Sonic cone width
Standard sonic cone (center of the measured object)Extra-narrow sonic cone (center of the measured object) |
Ctrl. Panel |
|---|
|
01 = Switching Status Indicator
06 = Teach Button 79 = Run/Error Indicator |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Sensing Face
|
Complementary Products |
|---|
|
ECAD data
Product Highlights
This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
