S2FP102 Safety Switch with Lock Function Electromechanic, Power to Lock Principle

Available from stock

Added to Your Cart:

Added to your request list:

The electromechanical safety switch with lock function is distinguished by a high locking force of 1150 N. This means that only one safety switch with locking function is required to attain the Cat. 4 PL e safety level (EN ISO 13849-1). The safety level, as well as the response time and risk time, remain unchanged when connected in series. Extensive diagnosis functions enhance system availability and simplify installation and maintenance. The unique star handle operating concept is especially well-suited for rotary and sliding doors.

Features at a Glance

Power to lock principle
Performance Level: Cat. 4 PL e
Locking force of 1150 N

Technical data

Electrical Data
Sensor Type	Locking unit
Supply Voltage	20.4 ... 26.4 V DC
Response Time	≤ 100 ms
Risk time	≤ 200 ms
Temperature Range	0 ... 60 °C
Storage temperature	-10 ... 90 °C
Safety Output	OSSD
Number of safety outputs (OSSDs)	2
PNP Safety Output/Switching Current	250 mA
Number of Signal Outputs	1
PNP signal output switching current	50 mA
Short Circuit Protection	yes
Protection Class	III

Mechanical Data
Housing Material	Plastic
Degree of Protection	IP66/IP67/IP69
Connection	M12 × 1; 8-pin
Latching Force, typical	25 / 50 N
Weight	733 g

Safety-relevant Data
Operating principle	RFID
Coding	Standard
Performance Level (EN ISO 13849-1)	Cat. 4 PL e
PFHD	5,20 × E-10 1/h
Safety Integrity Level (EN 61508)	SIL3
Safety Integrity Level (EN 62061)	SILCL3
PDDB (EN 60947-5-3)	yes
Locking Device	Power to lock principle
Locking force F (Zh)	1,150 N