PEBL201 Light Curtain Pick-to-Light

Available from stock

Added to Your Cart:

Added to your request list:

Pick-to-light light curtains work according to the retro-reflex principle. The required reflector is already mounted on the rear of the housing and serves as a reflective surface for the adjacent light curtain, which simplifies installation. The arrow-shaped, two-tone illuminated or flashing job indication points in the direction of the respective compartment from which the part is to be removed. It signals both correct and incorrect part removal.

Features at a Glance

Error prevention during partial picking processes in shelves and storage locations
Low mounting thanks to integrated reflector
Rugged aluminium housing
Directional, two-tone job indication

Technical data

Optical Data
Range	2,000 mm
Min. Distance to Reflector	100 mm
Measurement Field Height (MFH)	270 mm
Beam Distance	30 mm
Switching Hysteresis	< 15 %
Light Source	Red Light
Polarization Filter	yes
Service Life (T = +25 °C)	100,000 h
Max. Ambient Light	10,000 Lux
Opening Angle	2.5 °
Two-Lens Optic	yes

Electrical Data
Supply Voltage	10 ... 30 V DC
Current Consumption (Ub = 24 V)	< 70 mA
Switching Frequency	60 Hz
Response Time	8 ms
Temperature Drift	< 10 %
Temperature Range	-25 ... 60 °C
Switching Output Voltage Drop	< 2.5 V
PNP Switching Output/Switching Current	200 mA
Residual Current Switching Output	< 50 µA
Short Circuit Protection	yes
Reverse Polarity Protection	yes
Overload Protection	yes
Protection Class	III

Mechanical Data
Setting Method	Teach-In
Display	Illuminated arrow
Housing Material	Aluminum, powder-coated Plastic, PA
Optic Cover	Plastic, PMMA
Degree of Protection	IP65
Connection	M12 × 1; 4-pin
Cable Length	250 mm
Housing Length (L)	396 mm
Reflector Length (RL)	324 mm
Weight	194 g