Features at a Glance
- Emitted light disengageable
- Graphical display for easy operation
- Temperature drift eliminable
- Switching output A1 as analog output switchable (0...10 V/4...20 mA)
X1TA100QXT3 Laser Distance Sensor Time of Flight
Available from stock
Added to Your Cart:
These sensors have scratch-resistant optics and the emitted light can be switched off. They use the transit time measurement principle to measure the distance between the sensor and the object. Using a suitable reflector at the object, a highly accurate position measurement at large distances is also possible.
The configurations are selected using a menu and can be protected by a password.
Optical Data | |
|---|---|
| Working Range | 100 ... 100,200 mm |
| Analog Working Range | 200 ... 100,200 mm |
| Measuring Range | 10,000 mm |
| Reference Reflector/Reflector Foil | RF508 |
| Resolution | 2 ... 6 mm |
| Linearity | 0.5 % |
| Linearity Deviation | 50 mm |
| Switching Hysteresis | 3 ... 20 mm |
| Light Source | Laser (red) |
| Wavelength | 660 nm |
| Service Life (T = +25 °C) | 100,000 h |
| Laser Class (EN 60825-1) | 1 |
| Max. Ambient Light | 10,000 Lux |
| Beam Divergence | < 2 mrad |
| Reflector required | yes |
Electrical Data | |
|---|---|
| Supply Voltage | 18 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 100 mA |
| Switching Frequency | 50 Hz |
| Measuring Rate | 1 ... 100 /s |
| Response Time | 10 ... 200 ms |
| On-/Off-Delay | 0 ... 10,000 ms |
| Temperature Drift (-10 °C < Tu < 50 °C) | < 0.2 mm/K |
| Temperature Drift (Tu < -10 °C, Tu > 50 °C) | < 0.4 mm/K |
| Temperature Range | -25 ... 60 °C |
| Number of Switching Outputs | 2 |
| Switching Output Voltage Drop | < 2.5 V |
| Switching Output/Switching Current | 200 mA |
| Analog Output | 0...10 V |
| Short Circuit Protection | yes |
| Overload Protection | yes |
| Lockable | yes |
| Protection Class | III |
| FDA Accession Number | 0920382-000 |
Mechanical Data | |
|---|---|
| Setting Method | Menu (OLED) |
| Housing Material |
Plastic, ABS Plastic, PC |
| Optic Cover | Plastic, PMMA |
| Degree of Protection | IP68 |
| Connection | M12 × 1; 4-pin |
| Weight | 84 g |
Safety-relevant Data | |
|---|---|
| MTTFd (EN ISO 13849-1) | 346.68 a |
Output | |
|---|---|
| Error Output | yes |
| PNP NC | yes |
| Analog Output | yes |
Adjustable parameters | |
|---|---|
| Analog output |
0...10 V 4...20 mA |
| Output |
Analog Output Error Output Push-pull NPN PNP |
| All other parameters can be found in the product documentation. |
Standards and certificates |
|---|
|
|
Display brightness may decrease with age. This does not result in any impairment of the sensor function.
Table 1 |
||
|---|---|---|
| Working Distance | 0 m | 10 m |
| Light Spot Diameter | 5 mm | < 20 mm |
Connection Diagram |
|---|
|
|
Ctrl. Panel |
|---|
|
21 = Mode Button
60 = display |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode
2 = Receiver Diode
Screw M4 = 0.5 Nm
|
Reflector data | |
|---|---|
| RF505 | 0.1 ... 10 m |
| RF508 | 0.1 ... 10 m |
| RF258 | 0.1 ... 10 m |
| ZRAF07K01 | 0.1 ... 10 m |
| ZRAF08K01 | 0.1 ... 10 m |
| ZRDF__K01 | 0 ... 10 m |
Complementary Products |
|---|
|
ECAD data
Product Highlights
This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
