Features at a Glance
- High-speed evaluation of two analog voltages (GOOD/BAD selection)
- Easy operation via menu-driven LCD display
- Measurement of thickness, difference, height, unbalance and volume flow
- Two independent outputs
AW02 Analog Evaluation Unit Menu Driven
Available from stock
Added to Your Cart:
The AW02 analysis module can process the analog voltage values from 0 to 10 V of two sensors. The user-friendly LCD display shows all measurement and result values. The units of measurement can be freely selected, be it volts, millimeters, bars or degrees Celsius.
Electrical Data | |
|---|---|
| Supply Voltage | 18 ... 30 V DC |
| Current Consumption (Ub = 24 V) | 100 mA |
| Measuring Rate | 5,000 /s |
| Temperature Range | -10 ... 50 °C |
| Number of Switching Outputs | 2 |
| PNP Switching Output/Switching Current | 400 mA |
| PNP Error Output/Switching Current | 400 mA |
| Analog Output | 0...10 V |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Interface | RS-232 |
| Baud Rate | 38,4 kBd |
| Resolution | < 5 mV |
| Number of Analog Inputs | 2 |
| Analog Input | 0 ... 10 V |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Housing Material |
Aluminum, anodised Plastic, ABS |
| Degree of Protection | IP65 |
| Connection | M12 × 1; 8-pin |
| Weight | 535 g |
General Data | |
|---|---|
| Packaging unit | 1 Piece |
Output | |
|---|---|
| Error Output | yes |
| PNP NO/NC switchable | yes |
| Analog Output | yes |
| RS-232 Interface | yes |
Standards and certificates |
|---|
|
|
Connection Diagram |
|---|
|
|
Ctrl. Panel |
|---|
|
69 = ESC Button
60 = display 20 = Enter key 22 = Up key 23 = Down key 04 = Function Indicator 03 = Error Indicator |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
|
Complementary Products |
|---|
|
ECAD data
