text.skipToContent text.skipToNavigation
激光测距传感器 飞行时间 P2PY109

Features at a Glance

  • 2 mutually independent switching outputs
  • Robust stainless steel housing with IP69K
  • Wide working range and precise detection thanks to DS technology
  • No interactive influence

P2PY109 激光测距传感器 飞行时间

Available from stock
这些传感器以一类激光的光传递时间测量原理工作。即使信号非常微弱，采用“动态敏感” (DS) 技术的 wintec 也能保证迄今无与伦比的接收灵敏度。因此，传感器的工作范围最大可达 10 米。即使是在极端倾斜位置，也能可靠识别深色或光亮物体。此外，wintec 还能在外来光线或污垢等干扰性环境条件下可靠工作。316L（1.4404/V4A）材质的坚固不锈钢外壳能耐抗润滑油、冷却润滑剂和清洗剂。

Optical Data
Working Range 0 ... 10,000 mm
Setting Range 50 ... 10,000 mm
Reproducibility maximum 3 mm*
Linearity Deviation 10 mm*
Switching Hysteresis  < 15 mm
Light Source Laser (red)
Wavelength 660 nm
Service Life (T = +25 °C) 100,000 h
Laser Class (EN 60825-1) 1
Beam Divergence < 2 mrad
Max. Ambient Light 100,000 Lux
Light Spot Diameter see Table 1
Reflector required no

Electrical Data
Supply Voltage 18 ... 30 V DC
Current Consumption (Ub = 24 V) < 35 mA
Switching Frequency 50 Hz*
Switching Frequency (max.) 250 Hz*
Response Time 15 ms *
Response Time (min.) 4.7 ms *
Temperature Drift < 0.4 mm/K
Temperature Range -40 ... 55 °C
Number of Switching Outputs 2
Switching Output Voltage Drop < 2.5 V
Switching Output/Switching Current 100 mA
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Interface IO-Link V1.1
IO-Link transmission speed COM3
Protection Class III
FDA Accession Number 2110079-002

Mechanical Data
Setting Method Teach-In
Housing Material Stainless steel, V4A (1.4404 / 316L)
Optic Cover Plastic, PMMA
Degree of Protection IP68
IP69K
Connection M12 × 1; 5-pin
Ecolab yes
FDA compliant yes
Weight 182 g

Safety-relevant Data
MTTFd (EN ISO 13849-1) 543.71 a

Output
PNP NC, PNP NO yes
IO-Link yes
Acceleration sensor yes

Adjustable parameters
Output Error Output
Push-pull
NPN
Warning output
Circuit NC
NC/NO
NC+NO
NO
Other parameters Off-delay
On-delay
Acceleration sensor
Sensitivity
Filter
Unit of measure
Measuring mode
Emitted light
Sensor localization
Teach mode
All other parameters can be found in the product documentation.

Standards and certificates
B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf
* Depends on mode, see table 2

Table 1
Working Distance 0 m 5 m 10 m
Light Spot Diameter 5 mm 10 mm 15 mm

Table 2

Connection Diagram
B_ANS_0243.eps
- = supply voltage 0 V
+ = supply voltage +
E/A1 = programmable input/output / IO-Link
E/A2 = programmable input/output
E3 = input

Switching Distance Deviation
B_DIA_P2PY1xx_02.eps
Typical characteristic curve based on white, 90 % remission
Sr = Switching Distance
dSr = Switching Distance Change
black 6 % remission
grey 18 % remission

Ctrl. Panel
B_BED_II_6.eps
06 = Teach Button
68 = Power LED
5a = Switching Status Indicator, A1
6a = Switching Status Indicator, A2

Dimensioned Picture
B_BEM_P2PY1xx_01.tif
Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode 2 = Receiver Diode Screw M4 = 1 Nm

Complementary Products
  • IO-Link Master
  • Software
Product Comparison
3/4
4/4
5/4
6/4