Features at a Glance
- Miniature design
- 2 mutually independent switching outputs
- IO-Link interface
- Large working range
P1KY101 Laser Distance Sensor Time of Flight
Available from stock
Added to Your Cart:
The high-performance distance sensor with compact format accurately determines distance between the sensor and the object on the basis of transit time measurement. Two mutually independent switching outputs and the intelligent IO-Link interface permit multifunctional use for precisely ascertaining distance to an object, or for detecting the object at any two switching points. A large working range of 0 to 1,500 mm ensures top performance with a miniature format and flexibility where range is concerned. Thanks to laser class 1, the sensor’s laser beam is harmless for the human eye.
Optical Data | |
|---|---|
| Working Range | 0 ... 1,500 mm |
| Setting Range | 50 ... 1,500 mm |
| Switching Hysteresis | < 30 mm |
| Light Source | Laser (infrared) |
| Wavelength | 940 nm |
| Service Life (T = +25 °C) | 100,000 h |
| Laser Class (EN 60825-1) | 1 |
| Max. Ambient Light | 10,000 Lux |
| Light Spot Diameter | see Table 1 |
| Reflector required | no |
Electrical Data | |
|---|---|
| Supply Voltage | 10 ... 30 V DC |
| Supply Voltage with IO-Link | 18 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 15 mA |
| Switching Frequency | 10 Hz |
| Response Time | < 36 ms |
| Temperature Drift | < 2.5 % |
| Temperature Range | -30 ... 50 °C |
| Number of Switching Outputs | 2 |
| Switching Output Voltage Drop | < 2.5 V |
| Switching Output/Switching Current | 100 mA |
| Residual Current Switching Output | < 50 µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Lockable | yes |
| Interface | IO-Link V1.1 |
| Protection Class | III |
| FDA Accession Number | 1720547-001 |
Mechanical Data | |
|---|---|
| Setting Method | Teach-In |
| Housing Material |
Plastic, ABS/PC Plastic, PC |
| Optic Cover | Plastic, PMMA |
| Degree of Protection | IP67/IP68 |
| Connection | M8 × 1; 4-pin |
| Weight | 6 g |
Safety-relevant Data | |
|---|---|
| MTTFd (EN ISO 13849-1) | 2,266.52 a |
Output | |
|---|---|
| PNP NO | yes |
| IO-Link | yes |
Adjustable parameters | |
|---|---|
| Circuit |
NC NO |
| Other parameters |
Off-delay On-delay Hysteresis Emitted light Teach mode Switching point |
| All other parameters can be found in the product documentation. |
Standards and certificates |
|---|
|
|
Table 1 |
|||
|---|---|---|---|
| Working Distance | 350 mm | 700 mm | 1500 mm |
| Light Spot Diameter | 14 mm | 25 mm | 42 mm |
Connection Diagram |
|---|
|
- = supply voltage 0 V
+ = supply voltage + E/A1 = programmable input/output / IO-Link E/A2 = programmable input/output |
Switching Distance Deviation |
|---|
|
Typical characteristic curve based on white, 90 % remission
Sr = Switching Distance
dSr = Switching Distance Change
 black 6 % remission grey 18 % remission |
Ctrl. Panel |
|---|
|
68 = supply voltage indicator
06 = Teach Button 5a = Switching Status Indicator, A1 6a = Switching Status Indicator, A2 |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Receiver Diode
2 = Transmitter Diode
Screw M3 = 0,5 Nm
|
Complementary Products |
|---|
|
ECAD data
Product Highlights
This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
