Features at a Glance
- Recognition of transparent objects
- Collimated laser beam (Ø 0.35 mm diameter over the entire fork width)
- Rugged, corrosion-free V4A stainless steel housing in hygienic design
- Teach-in key and external teach-in
P1HJ005 Fork Sensor
Usually ready to ship in 15 days after order is received.
Added to Your Cart:
Fork sensors have a collimated laser beam with a very small diameter of 0.35 mm over the entire fork width. As a result, they’re capable of detecting extremely small parts down to a size of just 40 µm and even transparent objects at high speeds of up to 10 kHz. The innovative layout of the fork sensors in hygienic design permits various fork widths within a range of 50 to 220 mm, and allows contamination and cleaning agents to flow off of the surface in an ideal manner.
Optical Data | |
|---|---|
| Fork Width | 220 mm |
| Smallest Recognizable Part | 40 µm |
| Smallest Detectable Gap | 50 µm |
| Switching Hysteresis | < 10 % |
| Light Source | Laser (red) |
| Service Life (T = +25 °C) | 100,000 h |
| Laser Class (EN 60825-1) | 1 |
| Max. Ambient Light | 10,000 Lux |
| Light Spot Diameter | 0.35 mm |
| Repeat Accuracy | < 5 µm |
Electrical Data | |
|---|---|
| Supply Voltage | 10 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 20 mA |
| Switching Frequency | 10 kHz |
| Response Time | 50 µs |
| Off-Delay | 0 ... 100 ms |
| Temperature Range | -25 ... 60 °C |
| Switching Output Voltage Drop | < 2.5 V |
| PNP Switching Output/Switching Current | 100 mA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Teach Mode | NT, MT |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Setting Method | Teach-In |
| Housing Material | Stainless steel, V4A (1.4404 / 316L) |
| Optic Cover | Plastic |
| Degree of Protection | IP69K |
| Connection | M8 × 1; 4-pin |
| Ecolab | yes |
| Weight | 363 g |
Safety-relevant Data | |
|---|---|
| MTTFd (EN ISO 13849-1) | 1,615.89 a |
Output | |
|---|---|
| PNP NO | yes |
Adjustable parameters | |
|---|---|
| Circuit |
NC NC/NO NO |
| All other parameters can be found in the product documentation. |
Standards and certificates |
|---|
|
|
Connection Diagram |
|---|
|
|
Ctrl. Panel |
|---|
|
01 = Switching Status Indicator
02 = Contamination Warning 20 = Enter key 36 = Mode Indicator |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Emitter
2 = Receiver
Screw M4 = 1 Nm
|
ECAD data
Product Highlights
This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
