text.skipToContent text.skipToNavigation

ODXS936 Fiber-optic amplifier

Available from stock
wenglor fiber-optic cables are connected to these sensors. The graphic display assures easy, menu-driven sensor setup. Signal strengths and the switching threshold can be read from the display as numeric values or as a bar graph. Convenient programming and quick diagnosis is possible via the IO-Link interface.

Optical Data

Switching Hysteresis  < 15 %
Light Source Red Light
Service Life (T = +25 °C) 100,000 h
Max. Ambient Light 10,000 Lux

Electrical Data

Supply Voltage 18 ... 30 V DC
Current Consumption (Ub = 24 V) < 50 mA
Switching Frequency 4 kHz
Response Time 125 µs
On-/Off-Delay 0 ... 10,000 ms
Temperature Drift < 10 %
Temperature Range -25 ... 50 °C
Switching Output Voltage Drop < 2.5 V
Switching Output/Switching Current 100 mA
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Teach Mode NT, MT, ZT, DT, FT, HT, TP
Interface IO-Link V1.0
IO-Link Parameter > 12
Protection Class III

Mechanical Data

Setting Method Menu (OLED)
Housing Material Plastic, ABS
Plastic, PC
Degree of Protection IP65
Connection M8 × 1; 4-pin
DIN-Rail mounting 35 mm
Weight 42 g

General Data

Selectable menu language X
Password Protection X

Output

IO-Link yes
PNP NO yes

Adjustable parameters

Output Push-pull
PNP
Circuit NC
NC/NO
NO

Standards and certificates

B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf
Display brightness may decrease with age. This does not result in any impairment of the sensor function.

Connection Diagram

Ctrl. Panel

60 = display
20 = Enter key
22 = Up key
23 = Down key

Dimensioned Picture

Dimensions specified in mm (1 mm = 0.03937")

Complementary Products

  • Glass Fiber-Optic Cable
  • IO-Link Master
Initial start-up instructions
Operating instructions
Product description file
Product description file
wenglor-ODXS936-20230726-IODD1.0.1.zip
Declarations of Conformity / Approvals
Product Comparison