Features at a Glance
- Easy sensor configuration using the IO-Link interface
- Minimal mounting clearance thanks to wenglor weproTec
- Innovative ASIC circuit technology
- Integrated error display and error output
- Adjustable switching distance
I30H014 Inductive Sensor with IO-Link
Available from stock
Added to Your Cart:
The Inductive Sensors have not only been equipped with ASIC, but rather with an IO-Link interface as well for ideal integration into networks. As a result, a total of three switching distances and two switching frequencies can be selected, and PNP/NPN as well as NO/NC/antivalent options can be set as desired. This reduces the number of variants while simultaneously expanding the scope of functions.
Inductive Data | |
|---|---|
| Switching Distance | 35 mm |
| Standard Target | 105 × 105 mm |
| Correction Factors Stainless Steel V2A/CuZn/Al | 1,00/0,42/0,39 |
| Mounting | Non-flush |
| Mounting A/B/C/D in mm | 55/82/105/35 |
| Mounting B1 in mm | 0...80 |
| Switching Hysteresis | < 10 % |
Electrical Data | |
|---|---|
| Supply Voltage | 10 ... 30 V DC |
| Supply Voltage with IO-Link | 18 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 15 mA |
| Switching Frequency | 330 Hz |
| Temperature Drift | < 10 % |
| Temperature Range | -40 ... 80 °C |
| Switching Output Voltage Drop | < 1 V |
| Switching Output/Switching Current | 150 mA |
| Residual Current Switching Output | < 100 µA |
| Short Circuit Protection | yes |
| Overload Protection | yes |
| Reverse Polarity Protection | yes |
| Interface | IO-Link V1.1 |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Housing Material | Brass, nickel-plated |
| Degree of Protection | IP67 |
| Connection | M12 × 1; 4-pin |
| Weight | 139 g |
Safety-relevant Data | |
|---|---|
| MTTFd (EN ISO 13849-1) | 3,706.54 a |
General Data | |
|---|---|
| Packaging unit | 1 Piece |
Function | |
|---|---|
| Error Indicator | yes |
| Programmable switching distance | 20/30/35 mm |
| Programmable switching frequency | yes |
Output | |
|---|---|
| IO-Link | yes |
| Programmable error output | yes |
| PNP NO | yes |
Adjustable parameters | |
|---|---|
| Output |
Error Output Push-pull NPN PNP |
| Circuit |
NC NC/NO NO |
Standards and certificates |
|---|
|
|
Connection Diagram |
|---|
|
|
Mounting |
|---|
|
|
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Switching Status Indicator
Sleeve M30×1,5 = 50 Nm
|
Complementary Products |
|---|
|
ECAD data
Interface protocol
