text.skipToContent text.skipToNavigation

Features at a Glance

Clever inclusive mounting technology
Simple installation
Adjustable detection range
Large detection range
IO-Link 1.1
Minimal installation space

OTDK502A0091 Reflex Sensor Energetic

Available from stock

Added to Your Cart:

Added to your request list:

The transmitter and receiver in these sensors are located in a single housing. The sensor evaluates transmitted light reflected back from the object. The output is switched as soon as an object passes the selected range. Bright objects reflect more light than dark objects, and can thus be recognized from greater distances.

Features at a Glance

Clever inclusive mounting technology
Simple installation
Adjustable detection range
Large detection range
IO-Link 1.1
Minimal installation space

Technical data

Optical Data
Range	500mm
Switching Hysteresis	< 15%
Light Source	Infrared Light
Service Life (T = +25 °C)	100,000h
Max. Ambient Light	10,000Lux
Opening Angle	5°
Light Spot Diameter	see Table 1

Electrical Data
Supply Voltage	10 ... 30V DC
Supply Voltage with IO-Link	18 ... 30V DC
Current Consumption (Ub = 24 V)	< 30mA
Switching Frequency	500Hz
Response Time	1ms
Temperature Drift	< 10%
Temperature Range	-25 ... 60°C
Switching Output Voltage Drop	< 2.5V
PNP Switching Output/Switching Current	200mA
Residual Current Switching Output	< 50µA
Short Circuit Protection	yes
Reverse Polarity Protection	yes
Overload Protection	yes
Lockable	yes
Interface	IO-Link V1.1
Protection Class	III

Mechanical Data
Setting Method	Potentiometer
Housing Material	Plastic, ABS/GF
Degree of Protection	IP67
Connection	Cable; 4-wire
Cable length (L)	2m
Cable Jacket Material	PVC
Weight	46g

Safety-relevant Data
MTTFd (EN ISO 13849-1)	2,988.01a

General Data
Scope of delivery	1 × Z0008 mounting console 1 × initial start-up instructions 1 × MUTTER-M18-E012 hex nut 1 × sensor
Packaging unit	1 Piece

Output
IO-Link	yes
PNP NC, PNP NO	yes

Adjustable parameters
Output	Push-pull NPN PNP
Circuit	NC NC+NO NO
Other parameters	Off-delay On-delay Mode of operation Error output Switching hysteresis Emitted light
All other parameters can be found in the product documentation.

Standards and certificates

*IO-Link availability is valid for all sensors from revision G. The revision can be found in the production order number “xxxxx/G/xxxxxx,” which is indicated on the product label.