Features at a Glance
- Large working range
- Fully encapsulated
- Recognition of high-gloss and jet black objects
- Integrated logic
OPT162-P06 Retro-Reflex Sensor for Roller Conveyor Systems
Available from stock
Added to Your Cart:
These sensors have been specially designed for use in accumulation roller conveyors. Their compact design allows for installation between two rollers below the conveyor level. They are thus protected against mechanical damage.
Optical Data | |
|---|---|
| Range | 6,500mm |
| Reference Reflector/Reflector Foil | RQ100BA |
| Min. Distance to Reflector | 100mm |
| Switching Hysteresis | < 15% |
| Light Source | Red Light |
| Polarization Filter | yes |
| Service Life (T = +25 °C) | 100,000h |
| Max. Ambient Light | 10,000Lux |
| Opening Angle | 5° |
| Two-Lens Optic | yes |
Electrical Data | |
|---|---|
| Supply Voltage | 18 ... 30V DC |
| Current Consumption Sensor (Ub = 24 V) | < 30mA |
| Switching Frequency | 100Hz |
| Response Time | 5ms |
| Temperature Drift | < 10% |
| Temperature Range | -15 ... 50°C |
| Number of Switching Outputs | 1 |
| Switching Output Voltage Drop | < 0.8V |
| PNP Switching Output/Switching Current | 200mA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Logic | yes |
| Block Forwarding | yes |
| Valve Control | yes |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Housing Material | Plastic, PBT |
| Full Encapsulation | yes |
| Degree of Protection | IP65 |
| Connection | M12 × 1; 4-pin |
| Cable length (L) | 1.5m |
| Cable Jacket Material | PVC |
| Weight | 258g |
General Data | |
|---|---|
| Scope of delivery |
1 × Z0034 molded seal 1 × initial start-up instructions 1 × VENTIL-K04 solenoid valve 1 × M2.5 screw × 22 mm 1 × sensor |
Pneumatic Solenoid Valve Unit | |
|---|---|
| Valve no. | K04 |
| Supply Voltage Valve | 19.2 ... 28.8V |
| Current Consumption Valve | 86mA |
| Operating Pressure | 4 ... 7bar |
| Nominal Width | 0.8mm |
| Nominal flow rate 1 -> 2 | 20NL/min |
| Nominal flow rate 2 -> 3 | 100NL/min |
| Supply-Line Connector Pipe | 2× 8×1 |
| Working-Line Connector Pipe | 4×1 |
| Valve function | 3/2-Way |
| Switching function | NC |
Output | |
|---|---|
| PNP NO | yes |
Standards and certificates |
|---|
|
|
Connection Diagram |
|---|
|
|
Ctrl. Panel |
|---|
|
01 = Switching Status Indicator
|
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode
2 = Receiver Diode
|
Reflector data | |
|---|---|
| RQ100BA | 0.25 ... 6.5m |
| RE18040BA | 0.1 ... 4m |
| RQ84BA | 0.25 ... 5m |
| RR84BA | 0.2 ... 5m |
| RE9538BA | 0.15 ... 2m |
| RR50_A | 0.15 ... 3m |
| RE6040BR | 0.2 ... 2.5m |
| RE8222BA | 0.25 ... 1.8m |
| ZRAE02B01 | 0.2 ... 1.8m |
| ZRME03B01 | 0.15 ... 2m |
| RF505 | 0.15 ... 1.9m |
| RF508 | 0.15 ... 1.9m |
| RF258 | 0.15 ... 1.5m |
| ZRDF03K01 | 0.1 ... 3.5m |
| ZRDF10K01 | 0.1 ... 4.5m |
Complementary Products |
|---|
|
ECAD data
