Features at a Glance
- Integrated output
- Recognition of small parts
- Rear panel mounting
E1FL66VD Through-Beam Sensor
Available from stock
Added to Your Cart:
These through-beam sensors are best suited for use in industrial environments. Thanks to their large working range, the devices demonstrate excellent functional reliability in highly contaminated environments. The sensors can be checked for correct functioning via the test input.
Optical Data | |
|---|---|
| Range | 1,000mm |
| Switching Hysteresis | < 15% |
| Light Source | Infrared Light |
| Service Life (T = +25 °C) | 100,000h |
| Max. Ambient Light | 10,000Lux |
| Opening Angle | 30° |
Electrical Data | |
|---|---|
| Sensor Type | Receiver |
| Supply Voltage | 10 ... 30V DC |
| Current Consumption (Ub = 24 V) | < 30mA |
| Switching Frequency | 500Hz |
| Response Time | 1ms |
| Temperature Drift | < 10% |
| Temperature Range | -25 ... 60°C |
| Switching Output Voltage Drop | < 2.5V |
| Switching Output/Switching Current | 100mA |
| Residual Current Switching Output | < 50µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Housing Material | Plastic, ABS/GF |
| Degree of Protection | IP67 |
| Connection | Cable; 3-wire |
| Cable length (L) | 2m |
| Cable Jacket Material | PVC |
| Wire cross-section | 0.09mm² |
| Weight | 21g |
Safety-relevant Data | |
|---|---|
| MTTFd (EN ISO 13849-1) | 5,592.92a |
General Data | |
|---|---|
| Scope of delivery |
1 × BEF-SET-23 mounting set 1 × initial start-up instructions 1 × sensor |
Output | |
|---|---|
| PNP NC | yes |
Standards and certificates |
|---|
|
|
* Temperature range with permanently installed cable, bending radius: > 40 mm
Connection Diagram |
|---|
|
|
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Emitter / Receiver
Screw M2 = 0,3 Nm
|
ECAD data
