Features at a Glance
- Clever inclusive mounting technology
- Simple installation
- Glossy objects can be detected
- IO-Link 1.1
- Minimal installation space
OLWK503A0091 Retro-Reflex Sensor Universal
Available from stock
Added to Your Cart:
The retro-reflex sensor works with red light and a reflector. It also reliably detects objects with reflective or glossy surfaces at high speeds. Thanks to its great range, the sensor can, for example, be used to manage feed and presence controls as well as to detect objects on wide feed belts. The IO-Link interface can be used to configure retro-reflective barriers (PNP/NPN, NC/NO, switching distance), as well as for reading out switching statuses and signal values.
Optical Data | |
|---|---|
| Range | 5,000mm |
| Reference Reflector/Reflector Foil | RQ100BA |
| Switching Hysteresis | < 15% |
| Light Source | Red Light |
| Polarization Filter | yes |
| Service Life (T = +25 °C) | 100,000h |
| Max. Ambient Light | 10,000Lux |
| Opening Angle | 5° |
| Light Spot Diameter | see Table 1 |
| Two-Lens Optic | yes |
Electrical Data | |
|---|---|
| Supply Voltage | 10 ... 30V DC |
| Supply Voltage with IO-Link | 18 ... 30V DC |
| Current Consumption (Ub = 24 V) | < 30mA |
| Switching Frequency | 700Hz |
| Switching frequency (speed mode) | 900Hz |
| Response Time | 0.7ms |
| Response time (speed mode) | 0.6ms |
| Temperature Drift | < 10% |
| Temperature Range | -25 ... 60°C |
| Switching Output Voltage Drop | < 2.5V |
| PNP Switching Output/Switching Current | 200mA |
| Residual Current Switching Output | < 50µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Lockable | yes |
| Interface | IO-Link V1.1 |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Setting Method | Potentiometer |
| Housing Material | Plastic, ABS/GF |
| Degree of Protection | IP67 |
| Connection | Cable; 4-wire |
| Cable length (L) | 2m |
| Cable Jacket Material | PVC |
| Weight | 48g |
Safety-relevant Data | |
|---|---|
| MTTFd (EN ISO 13849-1) | 2,953.75a |
General Data | |
|---|---|
| Scope of delivery | 1 × mounting console |
| Packaging unit | 1 Piece |
Output | |
|---|---|
| IO-Link | yes |
| PNP NC, PNP NO | yes |
Adjustable parameters | |
|---|---|
| Output |
Push-pull NPN PNP |
| Circuit |
NC NC+NO NO |
| Other parameters |
Off-delay On-delay Mode of operation Error output Switching hysteresis Emitted light |
| All other parameters can be found in the product documentation. |
Standards and certificates |
|---|
|
|
*IO-Link availability is valid for all sensors from revision H. The revision can be found in the production order number “xxxxx/H/xxxxxx,” which is indicated on the product label.
Table 1 |
|||
|---|---|---|---|
| Working Distance | 0,2 m | 0,5 m | 5 m |
| Light Spot Diameter | 17 mm | 35 mm | 330 mm |
Connection Diagram |
|---|
|
|
Ctrl. Panel |
|---|
|
05 = Switching Distance Adjuster
30 = Switching Status/Contamination Warning 68 = Power LED |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode
2 = Receiver Diode
|
Reflector data | |
|---|---|
| RQ100BA | 0.01 ... 5m |
| RE18040BA | 0.01 ... 4.5m |
| RQ84BA | 0.01 ... 4.5m |
| RR84BA | 0.01 ... 4.5m |
| RE9538BA | 0.01 ... 2.2m |
| RE6151BM | 0.01 ... 4.3m |
| RR50_A | 0.01 ... 3.5m |
| RE6040BA | 0.01 ... 4m |
| RE8222BA | 0.01 ... 2.6m |
| RR34_M | 0.01 ... 2.5m |
| RE3220BM | 0.01 ... 1.5m |
| RE6210BM | 0.01 ... 1m |
| RR25_M | 0.01 ... 1.3m |
| RR25KP | 0.04 ... 0.8m |
| RR21_M | 0.01 ... 1.1m |
| ZRAE02B01 | 0.01 ... 2.2m |
| ZRDS01R01 | 0.05 ... 0.8m |
| ZRME01B01 | 0.01 ... 0.5m |
| ZRME03B01 | 0.01 ... 2.5m |
| ZRMR02K01 | 0.01 ... 0.7m |
| ZRMS02_01 | 0.01 ... 1m |
| RF505 | 0.05 ... 1.5m |
| RF255 | 0.05 ... 1.1m |
| RF508 | 0.05 ... 1.5m |
| RF258 | 0.05 ... 1.1m |
| RF4050 | 0.05 ... 1m |
| ZRAF07K01 | 0.05 ... 1.1m |
| ZRAF08K01 | 0.05 ... 1.5m |
| ZRDF03K01 | 0.04 ... 3.4m |
| ZRDF10K01 | 0.04 ... 4.5m |
Complementary Products |
|---|
|
ECAD data
