Features at a Glance
- Smallest recognizable part: 2,5 mm
- Time delay
- Special coated optics
- Switching frequency: 500 Hz
OLM104A0002 Retro-Reflex Sensor Universal
Available from stock
Added to Your Cart:
A reflector must be used in combination with these sensors. They can be installed in all kinds of industrial environments thanks to ample functional reserve. Even reflective objects can be reliably recognized through the use of polarized light.
Optical Data | |
|---|---|
| Range | 10,000mm |
| Reference Reflector/Reflector Foil | RQ100BA |
| Min. Distance to Reflector | 100mm |
| Smallest Recognizable Part | > 2,500µm |
| Switching Hysteresis | < 15% |
| Light Source | Laser (red) |
| Wavelength | 670nm |
| Polarization Filter | yes |
| Service Life (T = +25 °C) | 100,000h |
| Laser Class (EN 60825-1) | 1 |
| Max. Ambient Light | 10,000Lux |
| Opening Angle | 0.6° |
| Two-Lens Optic | yes |
Electrical Data | |
|---|---|
| Supply Voltage | 10 ... 30V DC |
| Current Consumption (Ub = 24 V) | < 30mA |
| Switching Frequency | 500Hz |
| Response Time | 1ms |
| Off-Delay | 20ms |
| Temperature Drift | < 10% |
| Temperature Range | -10 ... 60°C |
| Switching Output Voltage Drop | < 2.5V |
| PNP Switching Output/Switching Current | 200mA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Protection Class | III |
| FDA Accession Number | 1120740-000 |
Mechanical Data | |
|---|---|
| Setting Method | Potentiometer |
| Housing Material | Plastic, PBT |
| Coated Optics | yes |
| Full Encapsulation | yes |
| Degree of Protection | IP67 |
| Connection | M12 × 1; 4-pin |
| Weight | 27g |
General Data | |
|---|---|
| Scope of delivery |
1 × initial start-up instructions 1 × sensor |
Output | |
|---|---|
| PNP NC, PNP NO | yes |
Adjustable parameters | |
|---|---|
| Circuit |
NC NC+NO NO |
| All other parameters can be found in the product documentation. |
Standards and certificates |
|---|
|
|
Table 1 |
|||
|---|---|---|---|
| Working Distance | 0,2 m | 5 m | 10 m |
| Light Spot Diameter | 5 mm | 35 mm | 70 mm |
Connection Diagram |
|---|
|
|
Ctrl. Panel |
|---|
|
05 = Switching Distance Adjuster
30 = Switching Status/Contamination Warning 11 = ON-Delay/OFF-Delay Adjuster |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode
2 = Receiver Diode
Screw M4 = 1 Nm
|
Reflector data | |
|---|---|
| RQ100BA | 0.1 ... 10m |
| RE18040BA | 0.15 ... 8m |
| RQ84BA | 0.1 ... 9m |
| RR84BA | 0.1 ... 9m |
| RE9538BA | 0.1 ... 4m |
| RE6151BM | 0.15 ... 9m |
| RE6151BA | 0.1 ... 3.5m |
| RR50_A | 0.1 ... 9m |
| RE6040BA | 0.1 ... 10m |
| RE8222BA | 0.1 ... 6m |
| RR34_M | 0.2 ... 6m |
| RE3220BM | 0.2 ... 4m |
| RE6210BM | 0.25 ... 3m |
| RR25_M | 0.2 ... 5m |
| RR25KP | 0.15 ... 2m |
| RR21_M | 0.2 ... 3m |
| ZRAE02B01 | 0.1 ... 2.5m |
| ZRME01B01 | 0.1 ... 1.5m |
| ZRME03B01 | 0.15 ... 5.5m |
| ZRMR02K01 | 0.15 ... 2m |
| ZRMS02_01 | 0.2 ... 2.5m |
| RF505 | 0.2 ... 1.7m |
| RF255 | 0.2 ... 1.5m |
| RF508 | 0.2 ... 1.7m |
| RF258 | 0.2 ... 1.5m |
| ZRAF07K01 | 0.2 ... 1.5m |
| ZRAF08K01 | 0.2 ... 1.7m |
| ZRDF__K01 | 0.15 ... 8m |
Complementary Products |
|---|
|
ECAD data
