ZAC50PN02 Switch with PoE

Available from stock

Added to Your Cart:

Added to your request list:

This switch allows simple connecting of up to four Industrial Ethernet products. Two PoE-capable ports supply connected devices with the needed power. In addition, up to four PNP sensors and actuators can be connected via two digital I/O ports.

Features at a Glance

2 digital I/O ports
4 Industrial Ethernet ports
2 PoE-capable ports
High protection class IP67
Rugged aluminium housing

Technical data

Electrical Data
Supply Voltage	18 ... 32 V
Power consumption of device max.	0.25 A
Power consumption of system max.	2 A
Max. PoE Capacity	25 W
Max. Switching Current Switching Outputs	0.6 A
max. total current of the digital I/O ports	1 A
Switching Output Voltage Drop	< 2.5 V
Temperature Range	-25 ... 60 °C
Short Circuit Protection	yes
Overload Protection	yes
Reverse Polarity Protection	yes
PoE Ports	2
Number of digital I/O ports	2
Supported PoE Standard	IEEE802.3af, IEEE802.at
Supported PoE Classes	Class 0, 1, 2, 3
Baud Rate	10/100 Mbit/s
Transmission Mode	Full/Half Duplex
Managed Switch	yes
Switch Mode	Store & Forward
VLAN Prioritization	yes
Auto-Crossover	yes
Auto-Negotiating	yes
Auto-Polarity	yes
Interface	PROFINET
Protection Class	III

Mechanical Data
Material	Aluminum
Degree of Protection	IP67
Type of Connection Power	2 × 7/8", 5-pin
Type of Connection Industrial Ethernet Ports	2 × M12; 4-pin
Type of Connection PoE Ports	2 × M12; 8-pin
Type of connection digital I/O ports	2 × M12; 4-pin
Weight	1,130 g