Features at a Glance
- Stainless steel housing
- Smallest recognizable part: 0,1 mm
- Range: 14 m
- Switching frequency: 3 kHz
XW100PA3 Retro-Reflex Sensor Universal
Available from stock
Added to Your Cart:
A reflector must be used in combination with these sensors. They can be installed in all kinds of industrial environments thanks to ample functional reserve. Even reflective objects can be reliably recognized through the use of polarized light.
Optical Data | |
|---|---|
| Range | 14,000mm |
| Reference Reflector/Reflector Foil | RQ100BA |
| Smallest Recognizable Part | 100µm |
| Switching Hysteresis | < 15% |
| Light Source | Laser (red) |
| Wavelength | 655nm |
| Polarization Filter | yes |
| Service Life (T = +25 °C) | 100,000h |
| Laser Class (EN 60825-1) | 1 |
| Max. Ambient Light | 10,000Lux |
| Opening Angle | 1° |
| Beam Divergence | < 15mrad |
| Light Spot Diameter | see Table 1 |
| Focus Distance | 350mm |
| Two-Lens Optic | yes |
Electrical Data | |
|---|---|
| Supply Voltage | 10 ... 30V DC |
| Current Consumption (Ub = 24 V) | < 30mA |
| Switching Frequency | 3kHz |
| Response Time | 167µs |
| Temperature Drift | < 10% |
| Temperature Range | -25 ... 60°C |
| Switching Output Voltage Drop | < 2.5V |
| PNP Switching Output/Switching Current | 200mA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Protection Class | III |
| FDA Accession Number | 0820385-001 |
Mechanical Data | |
|---|---|
| Setting Method | Potentiometer |
| Housing Material |
Stainless steel, V2A (1.4305 / 303) Plastic, PBT |
| Full Encapsulation | yes |
| Degree of Protection | IP67 |
| Connection | M12 × 1; 4-pin |
| Weight | 40g |
Safety-relevant Data | |
|---|---|
| MTTFd (EN ISO 13849-1) | 1,584.21a |
General Data | |
|---|---|
| Scope of delivery |
1 × initial start-up instructions 1 × MUTTER-M18-E003 hex nut 1 × sensor |
Output | |
|---|---|
| PNP NC, PNP NO | yes |
Adjustable parameters | |
|---|---|
| Circuit |
NC NC+NO NO |
| All other parameters can be found in the product documentation. |
Standards and certificates |
|---|
|
|
* Laser class 1 is valid for all sensors from revision F. The revision can be found in the production order number “xxxxx/F/xxxxxx,” which is indicated on the product label.
Table 1 |
|||
|---|---|---|---|
| Working Distance | 0,2 m | 5 m | 10 m |
| Light Spot Diameter | 3 mm | 37,5 mm | 75 mm |
Connection Diagram |
|---|
|
|
Ctrl. Panel |
|---|
|
01 = Switching Status Indicator
02 = Contamination Warning 05 = Switching Distance Adjuster |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode
2 = Receiver Diode
|
Reflector data | |
|---|---|
| RQ100BA | 0.6 ... 14m |
| RE18040BA | 0.6 ... 9.5m |
| RQ84BA | 0.75 ... 11m |
| RR84BA | 0.55 ... 14m |
| RE9538BA | 0.55 ... 5m |
| RE6151BM | 0.35 ... 10m |
| RE6151BA | 0.5 ... 4.5m |
| RR50_A | 0.65 ... 9m |
| RE6040BA | 0.5 ... 11m |
| RE8222BA | 0.7 ... 5.5m |
| RR34_M | 0.6 ... 5.5m |
| RE3220BM | 0.55 ... 3.5m |
| RE6210BM | 0.45 ... 3.5m |
| RR25_M | 0.4 ... 4.5m |
| RR25KP | 0.3 ... 2.5m |
| RR21_M | 0.4 ... 3m |
| ZRAE02B01 | 0.7 ... 4.5m |
| ZRME01B01 | 0.5 ... 1.8m |
| ZRME03B01 | 0.5 ... 5m |
| ZRMR02K01 | 0.5 ... 2m |
| ZRMS02_01 | 0.6 ... 2.8m |
| RF508 | 0.4 ... 1.1m |
| RF258 | 0.4 ... 1.6m |
| ZRDF__K01 | 0.4 ... 7m |
Complementary Products |
|---|
|
ECAD data
