Features at a Glance
- Switching distance adjuster
- Stainless steel housing
LD86PA3 Retro-Reflex Sensor Universal
Available from stock
Added to Your Cart:
A reflector must be used in combination with these sensors. They can be installed in all kinds of industrial environments thanks to ample functional reserve. Even reflective objects can be reliably recognized through the use of polarized light.
Optical Data | |
|---|---|
| Range | 6,000mm |
| Reference Reflector/Reflector Foil | RQ100BA |
| Switching Hysteresis | < 15% |
| Light Source | Red Light |
| Polarization Filter | yes |
| Service Life (T = +25 °C) | 100,000h |
| Max. Ambient Light | 10,000Lux |
| Opening Angle | 5° |
| Two-Lens Optic | yes |
Electrical Data | |
|---|---|
| Supply Voltage | 10 ... 30V DC |
| Current Consumption (Ub = 24 V) | < 40mA |
| Switching Frequency | 1kHz |
| Response Time | 500µs |
| Temperature Drift | < 10% |
| Temperature Range | -10 ... 60°C |
| Switching Output Voltage Drop | < 2.5V |
| PNP Switching Output/Switching Current | 200mA |
| Residual Current Switching Output | < 50µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Setting Method | Potentiometer |
| Housing Material | Stainless steel, V2A (1.4305 / 303) |
| Full Encapsulation | yes |
| Degree of Protection | IP67 |
| Connection | M12 × 1; 4-pin |
| Weight | 36g |
Safety-relevant Data | |
|---|---|
| MTTFd (EN ISO 13849-1) | 2,168.75a |
General Data | |
|---|---|
| Scope of delivery |
1 × initial start-up instructions 1 × MUTTER-M18-E003 hex nut 1 × sensor |
Output | |
|---|---|
| PNP NC, PNP NO | yes |
Adjustable parameters | |
|---|---|
| Circuit |
NC NC+NO NO |
| All other parameters can be found in the product documentation. |
Standards and certificates |
|---|
|
|
Connection Diagram |
|---|
|
|
Ctrl. Panel |
|---|
|
01 = Switching Status Indicator
05 = Switching Distance Adjuster 02 = Contamination Warning |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Receiver Diode
2 = Transmitter Diode
|
Reflector data | |
|---|---|
| RQ100BA | 0.02 ... 6m |
| RE18040BA | 0.02 ... 3.3m |
| RQ84BA | 0.01 ... 4.5m |
| RR84BA | 0.02 ... 4.5m |
| RE9538BA | 0.02 ... 1.5m |
| RE6151BM | 0.01 ... 4.5m |
| RE6151BA | 0.02 ... 2.3m |
| RR50_A | 0.02 ... 4m |
| RE6040BA | 0.02 ... 4m |
| RE8222BA | 0.01 ... 2m |
| RR34_M | 0.01 ... 2.4m |
| RE3220BM | 0.01 ... 1.6m |
| RE6210BM | 0.01 ... 1.6m |
| RR25_M | 0.02 ... 1.6m |
| RR25KP | 0.02 ... 1.4m |
| RR21_M | 0.01 ... 1.6m |
| ZRAE02B01 | 0.02 ... 3m |
| ZRME01B01 | 0.02 ... 1m |
| ZRME03B01 | 0.02 ... 2.8m |
| ZRMR02K01 | 0.02 ... 1.1m |
| ZRMS02_01 | 0.01 ... 1.5m |
| RF505 | 0.06 ... 1.6m |
| RF255 | 0.06 ... 1.2m |
| RF508 | 0.06 ... 1.6m |
| RF258 | 0.06 ... 1.2m |
| ZRDF__K01 | 0.06 ... 4m |
| Z90R012 | 0.1 ... 1.75m |
| Z90R013 | 0.015 ... 3.87m |
| Z90R014 | 0.01 ... 3.5m |
| Z90R015 | 0 ... 1.9m |
Complementary Products |
|---|
|
ECAD data
