Features at a Glance
- Analog output 0…10 V
- Wide working range and precise detection thanks to DS technology
- No interactive influence
- Intuitive operating concept
- Large light spot
P1PY137 Laser Distance Sensor Time of Flight
Available from stock
Added to Your Cart:
The sensors function in accordance with the principle of transit time measurement with laser class 1. The wintec with Dynamic Sensitivity technology (DS) enables previously unattainable reception sensitivity even with very weak signals. The versions with a large light spot are suitable for reliably detecting objects with stamped, perforated or very uneven surfaces. The wintec also works very reliably in adverse ambient conditions, such as those caused by ambient light or dirt. Extensive condition monitoring functions additionally enable predictive maintenance and trouble-free operation.
Optical Data | |
|---|---|
| Working Range | 0 ... 5,000 mm |
| Measuring Range | 50 ... 5,000 mm |
| Reproducibility maximum | 3 mm* |
| Linearity Deviation | 10 mm* |
| Light Source | Laser (red) |
| Wavelength | 660 nm |
| Service Life (T = +25 °C) | 100,000 h |
| Laser Class (EN 60825-1) | 1 |
| Max. Ambient Light | 100,000 Lux |
| Light Spot Diameter | see Table 1 |
| Reflector required | no |
Electrical Data | |
|---|---|
| Supply Voltage | 18 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 40 mA |
| Measuring Rate | 100 /s* |
| Measuring Rate (max.) | 500 /s* |
| Temperature Drift | < 0.4 mm/K |
| Temperature Range | -40 ... 50 °C |
| Analog Output | 0...10 V |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Interface | IO-Link V1.1 |
| Baud Rate | COM3 |
| Protection Class | III |
| FDA Accession Number | 2110079-001 |
Mechanical Data | |
|---|---|
| Setting Method | Teach-In |
| Housing Material | Plastic, ABS |
| Optic Cover | Plastic, PMMA |
| Degree of Protection | IP67/IP68 |
| Connection | M12 × 1; 4/5-pin |
| Weight | 41 g |
Safety-relevant Data | |
|---|---|
| MTTFd (EN ISO 13849-1) | 508.83 a |
Output | |
|---|---|
| Error Output | yes |
| Analog Output | yes |
| IO-Link | yes |
Adjustable parameters | |
|---|---|
| Output |
Error Output Warning output |
| Other parameters |
Off-delay On-delay Sensitivity Filter Emitted light Sensor localization Key illumination Teach mode Unit of measure Measuring mode |
| All other parameters can be found in the product documentation. |
Standards and certificates |
|---|
|
|
* Depends on mode, see table 2
Table 1 |
|||
|---|---|---|---|
| Working Distance | 0 m | 2 m | 5 m |
| Light Spot Diameter | 5 mm | 30 mm | 65 mm |
Table 2 |
|---|
|
|
Connection Diagram |
|---|
|
- = supply voltage 0 V
+ = supply voltage + E/A1 = programmable input/output / IO-Link E3 = input O = analog output |
Ctrl. Panel |
|---|
|
06 = Teach Button
68 = supply voltage indicator 5a = Switching Status Indicator, A1 12 = Analog Output Indicator |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode
2 = Receiver Diode
Screw M4 = 0.5 Nm
|
Complementary Products |
|---|
|
Product Highlights
This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
