text.skipToContent text.skipToNavigation
15174 Results for: :relevance:allCategories:cxmCID197670:manuell_Einstellbare_Parameter:Beam+coding

Enable exact search

Search for an exact word or group of words in a specific order.
Filter your result according to the following criteria:
Products
Sort by
  • 1(current)
  • 2
  • 3
  • ...
  • 4
  • 1(current)
  • 2
  • 3
  • ...
  • 4
Go to Page
Applications
Code and BBD Reading on Cans by Bar Light
Code and BBD Reading on Cans by Bar Light
In the food industry, barcodes and the best before date (BBD) on cans must be read reliably in-process. Sufficient illumination is required for a machine vision camera to reliably recognize the data. A small bar light installed on the side of the conveyor illuminates the entire scanning area, enabling reliable code and BBD reading on cans. Its small dimensions and IP67 degree of protection make the bar light suitable for use in confined spaces and harsh ambient conditions.
>
Position Monitoring of the Running Wheels of Robots by Laser Distance Sensors Time of flight
Position Monitoring of the Running Wheels of Robots by Laser Distance Sensors Time of flight
In a block storage system, robots take over the transport of storage containers. To ensure precise movement of the robots on the rails of the storage system, two time-of-flight laser distance sensors are mounted between the wheels. During left/right movement, the sensors check that the wheels for forward/reverse movement are off the rail. Only then do they release the signal. At the same time, it is monitored whether the wheels are correctly and completely seated in the guide rail for the new direction of movement. If this is the case, the robot starts moving. Related applications can be found here.
>
Safety Inspection of Robots by Laser Distance Sensors Time of Flight
Safety Inspection of Robots by Laser Distance Sensors Time of Flight
The distance between the robot and the rail system must be continuously monitored during automated storage and retrieval as well as transport of storage containers in block storage systems by robots. For this purpose, two laser distance sensors (time of flight) in miniature design are mounted at an angle of approx. 90° between the wheels for left/right and forward/reverse movement. The sensors continuously measure if the distance to the rail system is correct to ensure that the robot is fully and correctly positioned on the guide rail. Related applications can be found here.
>
Position Monitoring of Robots in Block Storage Systems with Fork Sensors
Position Monitoring of Robots in Block Storage Systems with Fork Sensors
In a cube storage system, vessels such as containers, boxes or crates are stacked, stored and removed by robots and transported through the storage system. To monitor the position of the robots and the number of crossings passed, two fork sensors are installed between the wheels. During travel, the light beam of the light barrier is interrupted because the bar of the rail is between the fork arms of the sensor. At intersections, the web of the rail is interrupted, the light beam hits the receiver and registers the crossing. Related applications can be found here.
>
Double Layer Detection of Sheet Metal and Body Parts by Laser Distance Sensors Triangulation
Double Layer Detection of Sheet Metal and Body Parts by Laser Distance Sensors Triangulation
In the automotive industry, sheet metal parts are taken from a stock by a robot gripper and fed to the welding robot. Several sheets can stick together due to adherent oil, wedging of the sheets or magnetic charge. To ensure that only one sheet is gripped per assembly process, two laser distance sensors triangulation are mounted at opposite positions. The sensors measure the distance to the sheet and then calculate the sheet thickness via a difference calculation. If this result is greater than that of an individual sheet, a signal is output.
>
Checking the Dimensional Accuracy of Rubber Tracks with 2D/3D Profile Sensors
Checking the Dimensional Accuracy of Rubber Tracks with 2D/3D Profile Sensors
When manufacturing tires, the dimensional accuracy of the rubber treads must be checked at regular intervals. For this purpose, the width, thickness and profile of the black, glossy rubber tracks are precisely measured with a 2D/3D profile sensor. To ensure the safety of employees during maintenance work or machine malfunctions, the sensors are equipped with a certified laser shutdown. If the safety circuit is interrupted, the laser switches off while the sensor remains active. This reduces downtime to a minimum.
>
Anti-Collision Protection for Overhead Cranes via Laser Distance Sensor Time-of-Flight
Anti-Collision Protection for Overhead Cranes via Laser Distance Sensor Time-of-Flight
In the steel industry, overhead cranes are used to transport sheet metal coils. Since there are often several cranes on a shared track, there is a risk of collisions. Laser distance sensors time-of-flight work with a reflector mounted on the opposite crane. They measure the distance between two cranes up to a distance of 100 m and transmit the information to the control system. This enables hazardous distances to be detected and cranes to be slowed down in good time or stopped if they approach too closely.
>
Pin Check in Plug Production via Dark Field Illumination
Pin Check in Plug Production via Dark Field Illumination
When manufacturing plugs, it must be checked whether the correct number of pins are present and whether these pins are in the correct position. For this purpose, dark field illumination, consisting of a modular ring light and a dark field attachment, is attached together with a smart camera at a short distance in front of the products to be tested. Due to the very low angle of incidence (60°) of the light output, the illumination ensures the dark field effect and thus optimal illumination of the pin tips.
>
Ejection Monitoring of Small Metallic Parts in Feed Hoses via Inductive Ring Sensors
Ejection Monitoring of Small Metallic Parts in Feed Hoses via Inductive Ring Sensors
In screwing and feeding technology, metallic fasteners are transported through plastic hoses via pneumatic pressure and placed in plastic boxes at the end. In order to provide the presence and the exact number of objects for subsequent assembly, inductive ring sensors with separable housing are installed directly on the hose. Thanks to the correction factor 1 and adjustable sensitivity, reliable control of the material flow is possible at high speeds and with parts of different sizes and alloys.
>
Presence Check of Nails in Pallet Nail Machines by Inductive Ring Sensors
Presence Check of Nails in Pallet Nail Machines by Inductive Ring Sensors
In the manufacture of wooden pallets, automatic nailing machines are used to join the individual wooden parts. The nails required for the process are conveyed with compressed air through plastic hoses and then shot into the wood. Inductive ring sensors are installed at the ends of each hose to check that a nail has been shot through each hose and that the nail connection has been established correctly. Thanks to the separable housing, the sensor can be mounted at different points on the hose and thus individually adapted to the machine.
>
Detection of Rivets in Robot-Guided Punch Riveting via Inductive Ring Sensors
Detection of Rivets in Robot-Guided Punch Riveting via Inductive Ring Sensors
In the automotive industry, aluminum body parts are joined using rivets. In the case of robot-controlled punch riveting, the objects made of aluminum or brass are conveyed directly to the punching device through plastic hoses by compressed air. Before the rivets are applied automatically, the correct routing through the hose must be checked. For this purpose, an inductive ring sensor is installed on the hose via a clamp fastening. Thanks to the correction factor 1 and the adjustable sensitivity, objects of different sizes and alloys can be reliably detected.
>
Detection of Metallic Objects in Feed Hoses by Inductive Ring Sensors
Detection of Metallic Objects in Feed Hoses by Inductive Ring Sensors
In screwing and feeding technology, fasteners such as screws, nuts or rivets are automatically conveyed, sorted, separated and then supplied to the screw system via feed hoses by compressed air. Inductive ring sensors are mounted on the hose in order to reliably detect objects guided at high speed. Thanks to the separable housing, the sensors can be mounted and dismounted quickly. Inductive ring sensors detect metallic parts as small as 2 mm and visualize their presence with all-round illumination. Related applications can be found here.
>
Websites
Welding
Thanks to their particularly robust housing design, the sensors for the welding area are insensitive to high temperatures, flying sparks and welding spatter. This makes them particularly suitable for use in harsh industrial areas such as the automotive industry or machine tool construction.
>
Vacancies
Here, you will find an overview of vacancies for all locations worldwide. Please only apply online from our website. ​​​​​​​​​​​​​​We look forward to receiving your application!
>
Software
In order to achieve simple system integration, wenglor offers a software development kit (SDK) for all ShapeDrive G4 sensors, which can be downloaded free of charge. This is made up of the following components. 
>
Ultra-smart. Ultra-strong. Ultrasonic.
Ultrasonic sensors from wenglor are real all-rounders: They are ideal for detection of transparent, glossy and dark objects, reflective surfaces and materials of all kinds.
>
Sitemap
This page shows the page structure of the wenglor website.
>
Sensors
>
weCat3D Sensor Technology
The 2D/3D profile sensors in the weCat3D series deliver millions of measuring points per second with micrometer-accurate resolution in Z. Available in two performance classes, measuring ranges from a few millimeters to over one meter are possible and output rates of several thousand hertz are achieved.
>
Washdown Sensors
The cleaning-resistant sensors are ideal for use in spraying applications in the food, beverage and packaging industries. Neither spraying water nor significant temperature changes impair the function of the robust wenglor sensors.
>
Safe Welding Seam Tracking in Welding Systems
Fully automated welding places great demands on quality and precision. Consequently, the correct position of the respective seam must be reliably detected before the welding process is started in the robot cell. Welding systems are equipped with innovative weCat3D 2D/3D profile sensors for the purpose of weld seam tracking.
>
Robot Vision
Robot-supported pick and place is widely used in manufacturing, assembly and packaging processes where objects must be accurately detected for further processing, picked and then placed in a different position. Object localization is carried out via 2D cameras, which send the position data directly to the robot.
>
Special Products
Not all products are listed in our extensive online shop portfolio. These special products are listed on this page. Please use the contact form to order these products or to request further information.
>
Press Releases
>
  • 1(current)
  • 2
  • 3
  • ...
  • 22
Go to Page
Downloads
Data sheet
Data sheet (269 KB)
161-356-104
Data sheet
Data sheet (286 KB)
111-332-202
Data sheet
Data sheet (269 KB)
161-356-202
Data sheet
Data sheet (299 KB)
233-337-103
CAD data
CAD data
303-323-116, 303-339-108
Data sheet
Data sheet (367 KB)
163-338-204
Data sheet
Data sheet (275 KB)
113-307-202
Data sheet
Data sheet (277 KB)
113-332-102
Data sheet
Data sheet (295 KB)
163-338-104
Data sheet
Data sheet (278 KB)
113-332-202
Data sheet
Data sheet (286 KB)
111-332-102
Data sheet
Data sheet (284 KB)
111-355-202
Go to Page
Technical Glossary
1D Code
A 1D code, also known as barcode or one-dimensional code, is a code whose optical aquisition is made in an unidimensional way.
>
1D/2D Scanner
A 1D/2D scanner is a scanner that can read and process both 1D codes (1D code) and 2D codes (2D code).
>
2 of 5
See also: Code 2 of 5 Interleaved
>
2-Wire Devices
At 2-wire devices, load is connected in series to supply power.
>
2D Code
A 2D code, also known as a two-dimensional code, consists of a pattern of dark and light elements (bars, rectangles and squares with corresponding spaces in between) which are arranged in a 2D fashion. 2D codes have a more complex layout than 1D codes, and the technology required for acquiring and deciphering them is more complex as well as the scanner must always read the entire pattern depicted by the barcode in order to acquire and decipher 2D codes, and not just a horizontal line as is the case with 1D Codes. Two-dimensional codes contain more diverse information than one-dimensional codes, for example information for the identification of products, texts such as addresses, and delivery note numbers. In general, we differentiate within the 2D codes between the stacked codes (stacked code) and the matrix codes (DataMatrix code).
>
2D Code Scanner
A 2D code scanner is a scanner which operates according to the principle of an image processing system. It is equipped with a CCD or a CMOS element plus an integrated illumination and scans (scanning) a defined surface area depending on the selected scanning range. Thus, it is capable of reading 1D and 2D codes omnidirectionally.
>
3-A SSI
3-A SSI is an organization which sets standards in the field of food and beverages in close cooperation with the FDA. It is comparable with the EHEDG in Europe. Components in closed processes (e. g. piping) can be certified by 3-A SSI. Certified components bear the 3-A logo. Components in open processes (e. g. conveyor belts) cannot be certified.
>
3-Stage Enabling Switch
3-stage enabling switches (enabling switch), in comparison to 2-stage enabling switches, have the advantage of always ensuring safe shutdown in emergency situations regardless of individual user operation (release or pressing – in the event of a cramp). Mode of operation of a 3-stage enabling switch:
>
3D Tracking
3D tracking is the sum of rotary tracking or translatory tracking plus auto-focus. Objects are tracked with regard to the X and Y positions and are reliably detected by auto-focus at various working distances.
>
6-Band Multispectral Sensor
In a 6-bank multispectral sensor, the spectrum of visible light is broken down into six ranges including red, orange, yellow, green, blue and violet (ROYGBV color space). This makes it possible to detect extremely fine color nuances thanks to spectral measurement.
>
Absolute Pressure
Absolute pressure is pressure relative to zero pressure in an empty space (vacuum). Example: Atmospheric pressure (ambient pressure / air pressure) has an absolute value of approximately 1 bar and a relative value of 0 bar.
>
Absorption
Absorption is a process in which the radiant energy of a light beam passing through a medium is partly or fully converted into another form of energy, e.g. heat.
>
  • 1(current)
  • 2
  • 3
  • ...
  • 71
Go to Page
Product Comparison
3/4
4/4
5/4
6/4