This product does not meet your search requirements ex works. In order for it to fully meet your needs, you must manually adjust the following parameters: Analog Output.
Features at a Glance
- Digital and analog output
- Synchronous and multiplex mode
- Temperature drift eliminable
- Menu-driven settings
UMS603U035 Distance Sensor
Available from stock
Added to Your Cart:
These ultrasonic sensors evaluate the sound reflected from the object. They can detect almost any object and are especially well suited for monitoring fill levels of liquids and bulk goods and for detecting transparent objects. The sensor detects objects regardless of material, state of matter, color or degree of transparency. The graphical display is menu-guided for easy setup of the sensors. The IO-Link interface makes parametrization and diagnosis quick and easy. The sensor can only be used in reflex mode operation.
Ultrasonic Data | |
|---|---|
| Working Range | 300 ... 6,000 mm |
| Measuring Range | 5,700 mm |
| Reproducibility maximum | 5 mm |
| Linearity Deviation | 20 mm |
| Resolution | 1 mm |
| Ultrasonic Frequency | 75 kHz |
| Opening Angle | < 14 ° |
| Service Life (T = +25 °C) | 100,000 h |
| Switching Hysteresis | 30 mm |
Electrical Data | |
|---|---|
| Supply Voltage | 18 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 50 mA |
| Switching Frequency | 1.5 Hz |
| Response Time | < 334 ms |
| Temperature Range | -30 ... 60 °C |
| Number of Switching Outputs | 2 |
| Switching Output Voltage Drop | < 2.5 V |
| PNP Switching Output/Switching Current | 100 mA |
| Analog Output | 4...20 mA |
| Synchronous Mode | up to 40 sensors |
| Multiplex Mode | up to 16 sensors |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Interface | IO-Link V1.0 |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Setting Method |
Menu (OLED) IO-Link |
| Housing Material |
Epoxy resin/glass bubble mixture Plastic, PBT Plastic, PU Silicone |
| Sensing face | Plastic, ABS |
| Degree of Protection | IP67 |
| Connection | M12 × 1; 4/5-pin |
| Weight | 248 g |
Safety-relevant Data | |
|---|---|
| MTTFd (EN ISO 13849-1) | 493.35 a |
Function | |
|---|---|
| Selectable menu language | yes |
| Password Protection | yes |
Output | |
|---|---|
| Error Output | yes |
| PNP NO | yes |
| Analog Output | yes |
| IO-Link | yes |
Adjustable parameters | |
|---|---|
| Analog output |
4...20 mA 0...10 V |
| Output |
Error Output PNP |
| Circuit |
NC NO NC/NO |
| Other parameters |
Filter Multiplex mode Adjustable sonic cone Synchronous mode Teach mode |
| All other parameters can be found in the product documentation. |
Standards and certificates |
|---|
|
|
Display brightness may decrease with age. This does not result in any impairment of the sensor function.
Connection Diagram |
|---|
|
|
Characteristic response curve |
|---|
|
Characteristic curves show the position of the center or the front edge of the measured object (100 × 100 mm plate) at the time of switching.
Ob = Object
Sc = Sonic cone width
 Standard sonic cone (center of the measured object) Extra-narrow sonic cone (center of the measured object) Standard sonic cone (front edge of the measured object) |
| Characteristic response curve |
|---|
|
Characteristic curves show the position of the center or the front edge of the measured object (Ø 25 mm rod) at the time of switching.
Ob = Object
Sc = Sonic cone width
Standard sonic cone (center of the measured object)Extra-narrow sonic cone (center of the measured object) |
Ctrl. Panel |
|---|
|
60 = display
20 = Enter key 22 = Up key 23 = Down key |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Sensing Face
Screw M3 = 0,5 Nm
|
Complementary Products |
|---|
|
ECAD data
Product Highlights
This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
