Features at a Glance
- Condition monitoring
- High light intensity with large switching reserve
- IO-Link 1.1
- Test input for high operational reliability
P1PE102 Through-Beam Sensor
Usually ready to ship in 25 days after order is received.
Added to Your Cart:
The through-beam sensor works with red light as well as a transmitter and a receiver. Thanks to their high light intensity, the sensor provides a high degree of operational reliability even with interferences like steam, fog or dust. The transmitter can be deactivated using test input in order to test the functionality of the through-beam sensor. The IO-Link interface can be used to configure the sensor (PNP/NPN, NC/NO, switching distance), as well as for reading out switching statuses and signal values.
Optical Data | |
|---|---|
| Range | 20,000 mm |
| Smallest Recognizable Part | see Table 1 |
| Switching Hysteresis | 10 % |
| Light Source | Red Light |
| Service Life (T = +25 °C) | 100,000 h |
| Max. Ambient Light | 10,000 Lux |
Electrical Data | |
|---|---|
| Sensor Type | Receiver |
| Supply Voltage | 10 ... 30 V DC |
| Supply Voltage with IO-Link | 18 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 25 mA |
| Switching Frequency | 1,000 Hz |
| Switching Frequency (interference-free mode) | 500 Hz |
| Response Time | 0.5 ms |
| Response time (interference-free mode) | 1 ms |
| Temperature Drift | < 10 % |
| Temperature Range | -40 ... 60 °C |
| Switching Output Voltage Drop | < 2 V |
| Switching Output/Switching Current | 100 mA |
| Residual Current Switching Output | < 50 µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Interface | IO-Link V1.1 |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Setting Method | Potentiometer |
| Housing Material | Plastic, ABS/PC |
| Degree of Protection | IP67/IP68 |
| Connection | M12 × 1; 4-pin |
| Optic Cover | Plastic, PMMA |
| Weight | 31 g |
Safety-relevant Data | |
|---|---|
| MTTFd (EN ISO 13849-1) | 1,566.77 a |
Output | |
|---|---|
| NPN NC, NPN NO | yes |
| IO-Link | yes |
Adjustable parameters | |
|---|---|
| Output |
Push-pull NPN PNP |
| Circuit |
inactive Error output NC NC+NO NO |
| Other parameters |
Off-delay On-delay Mode of operation Hysteresis Switching point |
| All other parameters can be found in the product documentation. |
Standards and certificates |
|---|
|
|
Table 1 |
|||
|---|---|---|---|
| Distance transmitter/receiver | 4 m | 10 m | 20 m |
| Smallest Recognizable Part | 6 mm | 2 mm | 2,5 mm |
Connection Diagram |
|---|
|
|
Ctrl. Panel |
|---|
|
30 = Switching Status/Contamination Warning
05 = Switching Distance Adjuster 68 = supply voltage indicator |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Receiver Diode
2 = Alignment aid/Switching Status Indicator
3 = Wrench Size 7
Screw M4 = 0.5 Nm
|
Complementary Products |
|---|
|
ECAD data
Product Highlights
This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
