OEII403C0103 Through-Beam Sensor

Available from stock

Added to Your Cart:

Added to your request list:

The photoelectronic sensors in the hygienic housing are distinguished by a captive optic cover and food-safe, FDA-compliant materials. The hygienic design with no corners or edges enables optimal flow of cleaning agents. The laser-welded 316L stainless steel housing (1.4404/V4A) is resistant to high-pressure cleaning (degree of protection IP69K) and suitable for cleaning-intensive applications. When combined with the available accessories, gap-free installation is guaranteed for the highest hygiene requirements. Setting is performed by means of touch teach-in through the hermetically sealed housing.

Features at a Glance

Hygienic design makes it easy to clean
Made with food safe materials that are FDA approved
Touch teach-in, external teach-in
Waterproof (IP68/IP69K)

Technical data

Optical Data
Range	4,000 mm
Switching Hysteresis	< 15 %
Light Source	Red Light
Service Life (T = +25 °C)	100,000 h
Max. Ambient Light	10,000 Lux
Opening Angle	3 °

Electrical Data
Sensor Type	Receiver
Supply Voltage	10 ... 30 V DC
Current Consumption (Ub = 24 V)	< 40 mA
Switching Frequency	500 Hz
Response Time	1 ms
Temperature Drift	< 10 %
Temperature Range	-25 ... 60 °C
Switching Output Voltage Drop	< 2.5 V
PNP Switching Output/Switching Current	200 mA
Residual Current Switching Output	< 50 µA
Short Circuit Protection	yes
Reverse Polarity Protection	yes
Overload Protection	yes
Teach Mode	NT, MT, XT
Protection Class	III

Mechanical Data
Setting Method	Teach-In
Housing Material	Stainless steel, V4A (1.4404 / 316L)
Degree of Protection	IP68/IP69K
Connection	M12 × 1; 4-pin
Optic Cover	Plastic, PMMA (FDA)
Material Control Panel	Plastic, PC (FDA)
Weight	108 g