Features at a Glance
- Condition monitoring
- High switching frequency
- IO-Link 1.1
- Focused optics
- Detect extremely small parts starting at 0.3 mm
P1NL411 Retro-Reflex Sensor Universal
Available from stock
Added to Your Cart:
The retro-reflex sensor works with a fine laser beam and a reflector. The focused laser class 1 laser beam detects objects, e.g. during assembly, feed or presence checks, from 0.3 mm in size over the entire range. The IO-Link interface can be used to configure retro-reflex sensors (PNP/NPN, NC/NO, switching distance) and to output switching states and signal values.
Optical Data | |
|---|---|
| Range | 5,000 mm |
| Reference Reflector/Reflector Foil | RE6151BM |
| Min. Distance to Reflector | 0 mm |
| Smallest Recognizable Part | 0.3 mm |
| Switching Hysteresis | < 15 % |
| Light Source | Laser focused (red) |
| Polarization Filter | yes |
| Service Life (T = +25 °C) | 100,000 h |
| Laser Class (EN 60825-1) | 1 |
| Max. Ambient Light | 10,000 Lux |
| Light Spot Diameter | 1.5 mm |
| Focus Distance | 180 ... 220 mm |
| Single-Lens Optic | yes |
Electrical Data | |
|---|---|
| Supply Voltage | 10 ... 30 V DC |
| Supply Voltage with IO-Link | 18 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 20 mA |
| Switching Frequency | 5,000 Hz |
| Switching Frequency (interference-free mode) | 2,500 Hz |
| Response Time | 0.1 ms |
| Response time (interference-free mode) | 0.2 ms |
| On-Delay | 20 ms |
| Temperature Drift | < 10 % |
| Temperature Range | -25 ... 60 °C |
| Switching Output Voltage Drop | < 2 V |
| Switching Output/Switching Current | 100 mA |
| Residual Current Switching Output | < 50 µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Interface | IO-Link V1.1 |
| Protection Class | III |
| FDA Accession Number | 1911373-000 |
Mechanical Data | |
|---|---|
| Setting Method | Potentiometer |
| Housing Material | Plastic, ABS/PC |
| Degree of Protection | IP67/IP68 |
| Connection | M12 × 1; 4-pin |
| Optic Cover | Plastic, PMMA |
| Weight | 30 g |
Safety-relevant Data | |
|---|---|
| MTTFd (EN ISO 13849-1) | 2,369.59 a |
Output | |
|---|---|
| IO-Link | yes |
| PNP NO | yes |
Adjustable parameters | |
|---|---|
| Output |
Push-pull NPN PNP |
| Circuit |
NC NC/NO NO |
| Other parameters |
Off-delay On-delay Mode of operation Hysteresis Emitted light |
| All other parameters can be found in the product documentation. |
Standards and certificates |
|---|
|
|
Table 1 |
|||
|---|---|---|---|
| Working Distance | 1 m | 2,5 m | 5 m |
| Light Spot Diameter | 14 mm | 37 mm | 77 mm |
Connection Diagram |
|---|
|
|
Ctrl. Panel |
|---|
|
01 = Switching Status Indicator
05 = Switching Distance Adjuster 68 = supply voltage indicator |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Optical axis
Screw M4 = 0.5 Nm
|
Reflector data | |
|---|---|
| RQ100BA | 0 ... 6.5 m |
| RE18040BA | 0 ... 4.5 m |
| RQ84BA | 0 ... 6 m |
| RR84BA | 0 ... 7.8 m |
| RE9538BA | 0 ... 2.5 m |
| RE6151BM | 0 ... 5 m |
| RR50_A | 0 ... 5.5 m |
| RE6040BA | 0 ... 6.7 m |
| RE8222BA | 0 ... 3.7 m |
| RR34_M | 0 ... 4.2 m |
| RE3220BM | 0 ... 3 m |
| RE6210BM | 0 ... 1.8 m |
| RR25_M | 0 ... 2.6 m |
| RR25KP | 0 ... 1.2 m |
| RR21_M | 0 ... 1.5 m |
| Z90R004 | 0.15 ... 2.6 m |
| Z90R005 | 0.15 ... 3.6 m |
| ZRAE02B01 | 0 ... 2.8 m |
| ZRME01B01 | 0 ... 1 m |
| ZRME03B01 | 0 ... 3.3 m |
| ZRMR02K01 | 0 ... 1.3 m |
| ZRMS02_01 | 0 ... 1.4 m |
| RF505 | 0 ... 1.5 m |
| RF255 | 0 ... 1.3 m |
| RF508 | 0 ... 1.4 m |
| RF258 | 0 ... 1.5 m |
| RF4050 | 0 ... 1.2 m |
| ZRAF07K01 | 0 ... 1.3 m |
| ZRAF08K01 | 0 ... 1.5 m |
| Z91R001 | 0 ... 4.2 m |
| ZRDF03K01 | 0 ... 4.3 m |
| ZRDF10K01 | 0 ... 4.4 m |
Complementary Products |
|---|
|
ECAD data
Product Highlights
This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
