Features at a Glance
- Condition monitoring
- Low switching distance deviation for black/white
- IO-Link 1.1
- Reliably detect objects against any background
P1KH023 Reflex Sensor with Background Suppression
Usually ready to ship in 25 days after order is received.
Added to Your Cart:
The reflex sensor with background suppression works with red light according to the angle measurement principle and is suitable for the detection of objects against any background. The sensor always has the same switching distance, regardless of the color, shape and surface of the objects. Minimal height differences can be detected with the sensors and, for example, various parts can be reliably differentiated from each other. The IO-Link interface can be used to configure reflex sensors (PNP/NPN, NC/NO, switching distance) and to output switching statuses and distance values.
Optical Data | |
|---|---|
| Range | 150 mm |
| Setting Range | 30 ... 150 mm |
| Switching Hysteresis | < 10 % |
| Light Source | Red Light |
| Service Life (T = +25 °C) | 100,000 h |
| Max. Ambient Light | 10,000 Lux |
| Light Spot Diameter | see Table 1 |
Electrical Data | |
|---|---|
| Supply Voltage | 10 ... 30 V DC |
| Supply Voltage with IO-Link | 18 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 20 mA |
| Switching Frequency | 1,000 Hz |
| Switching Frequency (interference-free mode) | 500 Hz |
| Response time (interference-free mode) | 1 ms |
| Response Time | 0.5 ms |
| Temperature Drift | < 5 % |
| Temperature Range | -40 ... 60 °C |
| Switching Output Voltage Drop | < 2 V |
| Switching Output/Switching Current | 100 mA |
| Residual Current Switching Output | < 50 µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Lockable | yes |
| Interface | IO-Link V1.1 |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Setting Method | Potentiometer |
| Housing Material | Plastic, ABS/PC |
| Degree of Protection | IP67/IP68 |
| Connection | M12 × 1; 4-pin |
| Cable Length | 20 cm |
| Cable Jacket Material | Plastic, PUR |
| Optic Cover | Plastic, PMMA |
| Weight | 20 g |
Safety-relevant Data | |
|---|---|
| MTTFd (EN ISO 13849-1) | 1,718.95 a |
Output | |
|---|---|
| NPN NC, NPN NO | yes |
| IO-Link | yes |
Adjustable parameters | |
|---|---|
| Output |
Push-pull NPN PNP |
| Circuit |
inactive Error output NC NC+NO NO |
| Other parameters |
Off-delay On-delay Mode of operation Hysteresis Switching point Emitted light |
| All other parameters can be found in the product documentation. |
Standards and certificates |
|---|
|
|
* Temperature range with permanently installed cable, bending radius: > 20 mm
Pin assignment |
|---|
|
|
Table 1 |
|||
|---|---|---|---|
| Detection Range | 50 mm | 100 mm | 150 mm |
| Light Spot Diameter | 5 mm | 7 mm | 10 mm |
Connection Diagram |
|---|
|
|
Switching Distance Deviation |
|---|
|
Typical characteristic curve based on white, 90 % remission
Sr = Switching Distance
dSr = Switching Distance Change
 black 6 % remission grey 18 % remission |
Ctrl. Panel |
|---|
|
05 = Switching Distance Adjuster
30 = Switching Status/Contamination Warning 68 = supply voltage indicator |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode
2 = Receiver Diode
Screw M3 = 0,5 Nm
|
Complementary Products |
|---|
|
ECAD data
Product Highlights
This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
