Features at a Glance
- Highly precise measurement with a maximum linearity deviation of 0.05%
- Constant, surface-independent measured values
- Thermally stable measured values without any warm-up phase
- Industry 4.0 compatible thanks to Industrial Ethernet
PNBC108 Laser Distance Sensor Triangulation
Available from stock
Added to Your Cart:
Sensors from the PNBC range work with a high resolution CMOS line array and determine distance to the object by means of angular measurement. Top quality optics permit measured values with 16-bit resolution. Thanks to proven algorithms, stable measured values are obtained even for complex surfaces, for example sheet metal with speckle effect. They demonstrate outstanding accuracy with maximum linearity deviation of just 0.05%, and required only a short warm-up phase thanks to minimized temperature drift. Values are read out simultaneously via the analog output and the interface. Up to 4 switching outputs can be taught in externally. An incremental encoder input rounds the product out.
Optical Data | |
|---|---|
| Working Range | 200 ... 1,000 mm |
| Measuring Range | 800 mm |
| Reproducibility maximum | 100 µm |
| Reproducibility: 1 Sigma | 15 µm |
| Linearity Deviation | 375 µm |
| Light Source | Laser (red) |
| Wavelength | 658 nm |
| Service Life (T = +25 °C) | 100,000 h |
| Laser Class (EN 60825-1) | 2 |
| Max. Ambient Light | 10,000 Lux |
| Light Spot Diameter | < 1.6 mm |
Electrical Data | |
|---|---|
| Supply Voltage | 15 ... 30 V DC |
| Current Consumption (Ub = 24 V) | 280 mA |
| Switching Frequency | 15 kHz |
| Response Time | < 33 µs |
| Output rate | 10 ... 30,000 /s |
| Temperature Drift | 37.5 µm/K |
| Temperature Range | -10 ... 40 °C |
| Number of Switching Outputs | 4 |
| Switching Output Voltage Drop | < 1.5 V |
| Switching Output/Switching Current | 100 mA |
| Analog Output | 4...20 mA/0...10 V |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Teach Mode | VT, FT |
| Interface | Ethernet TCP/IP; EtherCat |
| Baud Rate | 100 Mbit/s |
| Protection Class | III |
| FDA Accession Number | 2320541-000 |
Mechanical Data | |
|---|---|
| Setting Method | Teach-In |
| Housing Material | Aluminum, anodised |
| Degree of Protection | IP67 |
| Connection | M12 × 1; 8-pin |
| Type of Connection Ethernet | M12 × 1; 4-pin, D-cod. |
| Optic Cover | Glass |
| Weight | 352 g |
Safety-relevant Data | |
|---|---|
| MTTFd (EN ISO 13849-1) | 300.87 a |
General Data | |
|---|---|
| Web server | yes |
| Scope of delivery | Calibration report |
Output | |
|---|---|
| Push-Pull | yes |
| EtherCAT | yes |
Adjustable parameters | |
|---|---|
| Output |
Analog Output Push-pull NPN PNP |
| Analog output |
0...10 V 4...20 mA |
| Circuit |
NC NC/NO NO |
| All other parameters can be found in the product documentation. |
Standards and certificates |
|---|
|
|
Connection Diagram |
|---|
|
|
Ctrl. Panel |
|---|
|
68 = supply voltage indicator
85 = Link/Act LED 8c = signal/status |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
|
Complementary Products |
|---|
|
Product Highlights
This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
