Features at a Glance
- Tool-free assembly
- Intuitive setup using display
- NFC via weCon app, IO-Link
- Blue LED
P1XD124 Fiber-optic amplifier
Available from stock
Added to Your Cart:
These sensors work according to the energetic principle. Light is transmitted through one fiber-optic cable and received through the other. The amplifier can be adapted to a wide range of application requirements using the various plastic fiber-optic cables or fiber-optic cables with adapter no. 4. The display shows both the switching threshold and the currently received signal. Thanks to its intuitive setup, the sensor can be quickly configured using the buttons. Complex parameterizations are also easy to do using a mobile device and the wenglor weCon app or via IO-Link. All sensor information is provided via the IO-Link process data. The fiber-optic cable and sensor are installed without the use of tools.
Optical Data | |
|---|---|
| Switching Hysteresis | < 15 % |
| Light Source | Blue Light |
| Service Life (T = +25 °C) | > 100,000 h |
| Max. Ambient Light | 10,000 Lux |
Electrical Data | |
|---|---|
| Supply Voltage | 10 ... 30 V DC |
| Supply Voltage with IO-Link | 18 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 40 mA |
| Switching Frequency | 7 kHz |
| Response Time | 71 µs |
| On-/Off-Delay | 0 ... 10,000 ms |
| Temperature Drift | < 10 % |
| Temperature Range | -25 ... 60 °C |
| Switching Output Voltage Drop | < 2 V |
| Switching Output/Switching Current | 100 mA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Teach Mode | NT, MT, MT with dynamic readjustment, jump detection, DT, BT, WT |
| Baud Rate | COM3 |
| Interface | IO-Link V1.1.3 |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Setting Method |
NFC Display |
| Housing Material |
Plastic, ABS Plastic, PC Plastic, PA |
| Degree of Protection | IP50 |
| Connection | M8 × 1; 4-pin |
| DIN-Rail mounting | 35 mm |
| Weight | 190 g |
Safety-relevant Data | |
|---|---|
| MTTFd (EN ISO 13849-1) | 640.47 a |
Output | |
|---|---|
| IO-Link | yes |
| PNP NO | yes |
Adjustable parameters | |
|---|---|
| Output |
Push-pull NPN PNP |
| Circuit |
inactive Error output NC NC+NO NO |
| Other parameters |
2 switching points Off-delay On-delay Dynamic readjustment Error indicator Error output Filter Hysteresis Switching point Emitted light Sensor localization Adjustable sensor mode Teach mode |
Standards and certificates |
|---|
|
|
Connection Diagram |
|---|
|
|
Ctrl. Panel |
|---|
|
06 = Teach Button
21 = Mode Button 24 = Plus Button 25 = Minus Button 5a = Switching Status Indicator, A1 60 = display 68 = supply voltage indicator 6a = Switching Status Indicator, A2 |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode
2 = Receiver Diode
|
Complementary Products |
|---|
|
Product Highlights
This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
