text.skipToContent text.skipToNavigation

Features at a Glance

Tool-free assembly
Intuitive setup using display
NFC via weCon app, IO-Link
Red LED

P1XD104 Fiber-optic amplifier

Available from stock

Added to Your Cart:

Added to your request list:

These sensors work according to the energetic principle. Light is transmitted through one fiber-optic cable and received through the other. The amplifier can be adapted to a wide range of application requirements using the various plastic fiber-optic cables or fiber-optic cables with adapter no. 4. The display shows both the switching threshold and the currently received signal. Thanks to its intuitive setup, the sensor can be quickly configured using the buttons. Complex parameterizations are also easy to do using a mobile device and the wenglor weCon app or via IO-Link. All sensor information is provided via the IO-Link process data. The fiber-optic cable and sensor are installed without the use of tools.

Features at a Glance

Tool-free assembly
Intuitive setup using display
NFC via weCon app, IO-Link
Red LED

Technical data

Optical Data
Switching Hysteresis	< 15 %
Light Source	Red Light
Service Life (T = +25 °C)	> 100,000 h
Max. Ambient Light	10,000 Lux

Electrical Data
Supply Voltage	10 ... 30 V DC
Supply Voltage with IO-Link	18 ... 30 V DC
Current Consumption (Ub = 24 V)	< 40 mA
Switching Frequency	7 kHz
Response Time	71 µs
On-/Off-Delay	0 ... 10,000 ms
Temperature Drift	< 10 %
Temperature Range	-25 ... 60 °C
Switching Output Voltage Drop	< 2 V
Switching Output/Switching Current	100 mA
Short Circuit Protection	yes
Reverse Polarity Protection	yes
Overload Protection	yes
Teach Mode	NT, MT, MT with dynamic readjustment, jump detection, DT, BT, WT
Baud Rate	COM3
Interface	IO-Link V1.1.3
Protection Class	III

Mechanical Data
Setting Method	NFC Display
Housing Material	Plastic, ABS Plastic, PC Plastic, PA
Degree of Protection	IP50
Connection	M8 × 1; 4-pin
DIN-Rail mounting	35 mm
Weight	190 g

Safety-relevant Data
MTTFd (EN ISO 13849-1)	640.47 a

Output
IO-Link	yes
PNP NO	yes

Adjustable parameters
Output	Push-pull NPN PNP
Circuit	inactive Error output NC NC+NO NO
Other parameters	2 switching points Off-delay On-delay Dynamic readjustment Error indicator Error output Filter Hysteresis Switching point Emitted light Sensor localization Adjustable sensor mode Teach mode

Standards and certificates

Connection Diagram

Ctrl. Panel
06 = Teach Button 21 = Mode Button 24 = Plus Button 25 = Minus Button 5a = Switching Status Indicator, A1 60 = display 68 = supply voltage indicator 6a = Switching Status Indicator, A2