Features at a Glance
- Tool-free assembly
- Can be adjusted using potentiometers
- IO-Link 1.1
- Functional flexibility (barrier, sensing device, reflex light barrier)
P1XD012 Fiber-optic amplifier
Available from stock
Added to Your Cart:
These sensors work according to the energetic principle. Light is transmitted through one fiber-optic cable and received through the other. The amplifier can be adapted to a wide range of application requirements using the various plastic fiber-optic cables or fiber-optic cables with adapter no. 4. The switching point can be easily adjusted using the potentiometer. Both the fiber-optic cables and sensors can be mounted without the use of tools.
Optical Data | |
|---|---|
| Switching Hysteresis | < 15 % |
| Light Source | Red Light |
| Service Life (T = +25 °C) | > 100,000 h |
| Max. Ambient Light | 10,000 Lux |
Electrical Data | |
|---|---|
| Supply Voltage | 10 ... 30 V DC |
| Supply Voltage with IO-Link | 18 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 30 mA |
| Switching Frequency | 0.9 kHz |
| Switching frequency (speed mode) | 1.8 kHz |
| Response Time | 263 µs |
| On-/Off-Delay | 0 ... 200 ms |
| Temperature Drift | < 10 % |
| Temperature Range | -25 ... 60 °C |
| Switching Output Voltage Drop | < 2 V |
| Switching Output/Switching Current | 100 mA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Teach Mode | NT, MT, MT with dynamic readjustment, jump detection, DT, BT, WT |
| Baud Rate | COM2 |
| Interface | IO-Link V1.1 |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Setting Method | Potentiometer |
| Housing Material |
Plastic, ABS Plastic, PC Plastic, PA |
| Degree of Protection | IP50 |
| Connection | M8 × 1; 4-pin |
| DIN-Rail mounting | 35 mm |
| Weight | 190 g |
Safety-relevant Data | |
|---|---|
| MTTFd (EN ISO 13849-1) | 640.47 a |
Output | |
|---|---|
| IO-Link | yes |
| NPN NO | yes |
Adjustable parameters | |
|---|---|
| Output |
Push-pull NPN PNP |
| Circuit |
Error output inactive NC+NO |
Standards and certificates |
|---|
|
|
Connection Diagram |
|---|
|
|
Ctrl. Panel |
|---|
|
05 = Switching Distance Adjuster
5a = Switching Status Indicator, A1 68 = supply voltage indicator |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode
2 = Receiver Diode
|
Complementary Products |
|---|
|
Product Highlights
This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
