P1XD011 Fiber-optic amplifier

Available from stock

Added to Your Cart:

Added to your request list:

These sensors work according to the energetic principle. Light is transmitted through one fiber-optic cable and received through the other. The amplifier can be adapted to a wide range of application requirements using the various plastic fiber-optic cables or fiber-optic cables with adapter no. 4. The switching point can be easily adjusted using the potentiometer. Both the fiber-optic cables and sensors can be mounted without the use of tools.

Features at a Glance

Tool-free assembly
Can be adjusted using potentiometers
IO-Link 1.1
Functional flexibility (barrier, sensing device, reflex light barrier)

Technical data

Optical Data
Switching Hysteresis	< 15 %
Light Source	Red Light
Service Life (T = +25 °C)	> 100,000 h
Max. Ambient Light	10,000 Lux

Electrical Data
Supply Voltage	10 ... 30 V DC
Supply Voltage with IO-Link	18 ... 30 V DC
Current Consumption (Ub = 24 V)	< 30 mA
Switching Frequency	0.9 kHz
Switching frequency (speed mode)	1.8 kHz
Response Time	263 µs
On-/Off-Delay	0 ... 200 ms
Temperature Drift	< 10 %
Temperature Range	-25 ... 60 °C
Switching Output Voltage Drop	< 2 V
Switching Output/Switching Current	100 mA
Short Circuit Protection	yes
Reverse Polarity Protection	yes
Overload Protection	yes
Teach Mode	NT, MT, MT with dynamic readjustment, jump detection, DT, BT, WT
Baud Rate	COM2
Interface	IO-Link V1.1
Protection Class	III

Mechanical Data
Setting Method	Potentiometer
Housing Material	Plastic, ABS Plastic, PC Plastic, PA
Degree of Protection	IP50
Connection	M8 × 1; 4-pin
DIN-Rail mounting	35 mm
Weight	190 g