Features at a Glance
- Recognition of transparent objects
- No wiring required thanks to plug connector
- Mount for fiber optic cable adapter 3
- Increased light output
- Add-on module for ODXS959
ODXS960 Fiber-optic amplifier
Available from stock
Added to Your Cart:
These sensors are connected to the basic module. wenglor fiber optic cables can be adapted to them. The graphic display assures easy, menu-driven sensor setup. Signal strengths and the switching threshold can be read from the display as numeric values or as a bar graph. Convenient programming and quick diagnosis is possible via the IO-Link interface.
Optical Data | |
|---|---|
| Switching Hysteresis | 15 % |
| Light Source | Red Light |
| Service Life (T = +25 °C) | 100,000 h |
| Max. Ambient Light | 10,000 Lux |
Electrical Data | |
|---|---|
| Current Consumption (Ub = 24 V) | + 20 mA |
| Response Time | + 70 µs |
| On-/Off-Delay | 0 ... 10,000 ms |
| Temperature Drift | < 10 % |
| Temperature Range | -25 ... 50 °C |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Teach Mode | NT, MT, ZT, DT, FT, HT, TP |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Setting Method | Menu (OLED) |
| Housing Material |
Plastic, ABS Plastic, PC |
| Degree of Protection | IP50 |
| DIN-Rail mounting | 35 mm |
| Weight | 37 g |
Safety-relevant Data | |
|---|---|
| MTTFd (EN ISO 13849-1) | 1,089 a |
Output | |
|---|---|
| PNP NO | yes |
Adjustable parameters | |
|---|---|
| Output |
NPN PNP Push-pull |
| Circuit |
NC NC/NO NO |
Standards and certificates |
|---|
|
|
Display brightness may decrease with age. This does not result in any impairment of the sensor function.
Ctrl. Panel |
|---|
|
60 = display
|
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode
2 = Receiver Diode
|
Complementary Products |
|---|
|
