Features at a Glance
- Three configurable switching distances: 15/20/25 mm
- Easy to replace sensors with data storage feature
- Cable with analysis module integrated into M12 sensor connector
- Cable lengths of 5 to 20 m
INTT229 Inductive Analysis Module for Extreme Temperature Ranges
Available from stock
Added to Your Cart:
The inductive high-temperature sensors are designed for use in very hot work environments and consist of an analysis module with cable and a separate sensor head. Long switching distances and a long service life in hot areas ensure maximum system reliability. Sensor heads can be replaced without the use of tools, and numerous standard cable lengths with integrated analysis module are available separately. weproTec technology makes it possible to install the sensors directly next to or opposite one another. In addition, IO-Link can be used to individually configure sensor parameters such as switching distances and output functions.
Inductive Data | |
|---|---|
| Switching Distance | 25 mm |
Electrical Data | |
|---|---|
| Supply Voltage | 10 ... 30 V DC |
| Supply Voltage with IO-Link | 18 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 15 mA |
| Switching Frequency | 50 Hz |
| Temperature range of the plug | 0 ... 70 °C |
| Number of Switching Outputs | 2 |
| Switching Output Voltage Drop | < 1 V |
| Switching Output/Switching Current | 100 mA |
| Residual Current Switching Output | < 100 µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Interface | IO-Link V1.1 |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Analysis module material | Brass, nickel-plated |
| Degree of protection, sensor head | IP50 |
| Degree of protection of the plug | IP50 |
| Connection | M12 × 1; 4-pin |
| Cable Length (L) | 15 m |
| Cable Jacket Material | Plastic, PFA |
| Outer diameter cable | 3.4 mm |
| Bending Radius | > 17 mm |
| PWIS-free | yes |
| Weight | 765 g |
Safety-relevant Data | |
|---|---|
| MTTFd (EN ISO 13849-1) | 3,706.54 a |
General Data | |
|---|---|
| Scope of delivery | Push-pull connection cable with analysis module, M12 connector; MUTTER-M12-E001 |
Function | |
|---|---|
| Error Indicator | yes |
| Programmable switching distance | 15/20/25 mm |
Output | |
|---|---|
| IO-Link | yes |
| Error Output | yes |
| PNP NO | yes |
Adjustable parameters | |
|---|---|
| Output |
Push-pull NPN PNP |
| Circuit |
NC NC/NO NO |
Standards and certificates |
|---|
|
|
Connection Diagram |
|---|
|
|
Ctrl. Panel |
|---|
|
01 = Switching Status Indicator
|
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Switching Status Indicator
2 = Push-Pull connector
|
Complementary Products |
|---|
|
Product Highlights
This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
