text.skipToContent text.skipToNavigation

IR5D002 Inductive Sensor Ring sensor

Available from stock
The inductive ring sensor with separable housing enables quick and flexible mounting on various objects, such as hoses. Its compact construction, with a switching status indicator visible on all sides and a cable outlet in the hose direction, is particularly well suited for confined spaces. It is intuitive to operate via the potentiometer or the IO-Link interface. The sensor switches independently of the material thanks to correction factor 1. Frequency switching enables the operation of several sensors in the immediate vicinity without mutual interference.

Inductive Data

Inside diameter 25.1 mm
Max. tube diameter 25 mm
Installation A/Bx/By/C in mm 0/42/100/10
Installation A/Bx/By/C in mm with frequency switching 0/0/0/10
Functional principle Dynamic
Smallest recognizable object (Ø) 4 mm*
Correction Factors Stainless Steel V2A/CuZn/Al 1/1/1

Electrical Data

Supply Voltage 10 ... 30 V DC
Current Consumption (Ub = 24 V) < 25 mA
Object speed 0.1 ... 50 m/s
Response Time  < 300 µs
Ready-state delay < 1.5 s
Switching Output Voltage Drop 1.5 V
Temperature Range 0 ... 60 °C
Short Circuit Protection yes
Overload Protection yes
Reverse Polarity Protection yes
Switching Output/Switching Current 100 mA
Pulse extension 200 ms
Interface IO-Link V1.1
IO-Link Version 1.1

Mechanical Data

Connection M8 × 1; 4-pin
Setting Method Potentiometer/IO-Link
Hanger opening/closing cycles Max. 100
Degree of Protection IP54
Weight 44 g

General Data

Scope of delivery 1 × ring sensor incl. soft binder
Packaging unit 1 Piece

Output

NPN NO yes

Adjustable parameters

Output PNP
Push-pull
NPN
Circuit NO
NC
NC/NO
Pulse extension 5 ... 200 ms
Other parameters Sensitivity
Error indicator
Frequency switching

Standards and certificates

B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf
* Relates to a steel ball when the setting potentiometer max. is selected

Connection Diagram

Mounting

Ctrl. Panel

0b = Pulse length adjuster
17 = Sensitivity Adjustment
1c = Status display/setup aid
3a = Switching Status Indicator/Error Indicator
68 = supply voltage indicator

Dimensioned Picture

Dimensions specified in mm (1 mm = 0.03937")
M4 screw = 2.9 Nm
Initial start-up instructions
Operating instructions
Product description file
Product description file
wenglor-IR5D002-20231207-IODD1.1.zip
Interface protocol
Interface protocol
Interface_Protocol_IO-Link_Parameter_Process_Data_IRxx00x.pdf
Declarations of Conformity / Approvals

Product Highlights

This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
Product Comparison