Features at a Glance
- Simple operation via the display
- Measurement independent of flow direction
- Installation in any position
- Highest precision of its class
- Temperature of the medium: 0 ... 60° C (140° C for 24 hours without current measurement)
FFAF115 Flow Sensor
Usually ready to ship in 30 days after order is received.
Added to Your Cart:
wenglor UniFlow flow sensors measure the flow rate of aqueous and oily media in closed piping systems.
UniFlow flow sensors are very easy to operate thanks to the integrated display. The highly visible switching status display enables the rapid localization of affected sensors for maintenance processes.
Sensor-specific data | |
|---|---|
| Measuring Range | 15 ... 100 cm/s |
| Setting Range | 20 ... 100 cm/s |
| Medium | Oil |
| Measuring error (total) | 2 % |
| MTTFd (EN ISO 13849-1) | 766.91 a |
| Switching Hysteresis | 5 % |
| Temperature gradient | 30 K |
| Response time in case of temperature jump | 10 s |
Environmental conditions | |
|---|---|
| Temperature of medium | 0 ... 60 °C |
| Ambient temperature | -20 ... 70 °C |
| Pressure Resistance | 60 bar |
| EMC | DIN EN 60947-5-9 |
| Shock resistance per DIN IEC 68-2-27 | 30 g / 11 ms |
| Vibration resistance per DIN IEC 60068-2-6 | 20 g (10...2000 Hz) |
Electrical Data | |
|---|---|
| Supply Voltage | 16 ... 32 V DC |
| Current Consumption (Ub = 24 V) | 60 mA |
| Number of Switching Outputs | 1 |
| Analog Output | 0...10 V |
| Signal source | Temperature |
| Response Time | 4 ... 15 s |
| Relay Output/Switching Current (24 VDC) | < 1 A |
| Load Current Voltage Output | < 20 mA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Setting Method | Menu |
| Housing Material |
Plastic, PBT Plastic, PC |
| Material Control Panel | Polyester |
| Material in contact with media |
Stainless steel, V4A (1.4404 / 316L) Stainless steel, V4A (1.4435/316L) Rubber, FKM |
| Degree of Protection | IP67 * |
| Connection | M12 × 1; 5-pin |
| Process Connection | Sealing cone M18 × 1,5 |
| Process Connection Length (PCL) | 64 mm |
| Probe Length (PL) | 44 mm |
| Weight | 288 g |
Output | |
|---|---|
| Analog output temperature | yes |
| PNP NO | yes |
Adjustable parameters | |
|---|---|
| Circuit |
NC NC/NO NO |
| Other parameters |
Switching point Selectable measurement range |
| All other parameters can be found in the product documentation. |
Standards and certificates |
|---|
|
|
* Certified by wenglor
Connection Diagram |
|---|
|
|
Ctrl. Panel |
|---|
|
01 = Switching Status Indicator
60 = display 20 = Enter key 22 = Up key 99 = Right button |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
|
Complementary Products |
|---|
|
ECAD data
