text.skipToContent text.skipToNavigation

Features at a Glance

Fill-level measurement in all media: liquid, pasty, sticky or solid
Process optimization with IO-Link 1.1
Quick sensor replacement with data storage
Two adjustable switching outputs

FXSL001 Fill-level Sensor with IO-Link

Available from stock

Added to Your Cart:

Added to your request list:

LevelTech fill-level sensors work in accordance with the innovative frequency sweep principle. With the help of this functional principle, the sensors detect any desired medium on the basis of the measured resonant frequency. With their two adjustable switching outputs, the sensors are capable of differentiating between foam and liquid or two different media. Sensor parameters, as well as filter and output functions, can be individually configured via IO-Link. The stainless steel housing is FDA compliant and can be installed in the tightest of spaces thanks to its compact design.

Features at a Glance

Fill-level measurement in all media: liquid, pasty, sticky or solid
Process optimization with IO-Link 1.1
Quick sensor replacement with data storage
Two adjustable switching outputs

Technical data

Sensor-specific data
Measuring principle	Frequency sweep
Measuring Range > DK***	1.5
Medium	Liquids, granulate, powder
Response Time	0.04 s

Environmental conditions
Media temperature TM (TU < 50 °C)	-40 ... 115 °C**
Media temperature TM brief (TU < 50 °C, t < 1 h)	-40 ... 130 °C
Ambient temperature	-40 ... 85 °C
Storage temperature	-40 ... 85 °C
Pressure Resistance	100 bar
EMC	DIN EN 61326 *
Vibration resistance per DIN IEC 60068-2-6	1,6 mm p-p (2...25 Hz), 4 g (25...100 Hz)

Electrical Data
Supply Voltage	8 ... 36 V DC
Current Consumption (Ub = 24 V)	< 35 mA
Number of Switching Outputs	2
Power-up Time	< 3 s
Switching Output/Switching Current	100 mA
Switching Output Voltage Drop	< 0.7 V
Signal source	Change of medium
Leakage Current	< 100 µA
Short Circuit Protection	yes
Reverse Polarity Protection	yes
Interface	IO-Link V1.1

Mechanical Data
Setting Method	IO-Link
Housing Material	Stainless steel, V4A (1.4404/316L)
Material in contact with media	Stainless steel, V4A (1.4404 / 316L) Plastic, PEEK
Degree of Protection	IP67/IP69K
Connection	M12 × 1; 4-pin
Connector Plug Material	Stainless Steel
Process Connection	G 1/2"
Weight	77 g

Safety-relevant Data
MTTFd (EN ISO 13849-1)	686 a

Function
Attenuation (adjustable)	0 ... 10 s
Selective fill-level measurement	yes

Output
Switchable to NC/NO	yes
IO-Link	yes
Push-Pull	yes

Adjustable parameters
Output	Push-pull NPN PNP
Circuit	NC NC/NO NO
Other parameters	2 switching points
All other parameters can be found in the product documentation.

Standards and certificates

* mounted in closed metal tank
** TM= temperature of medium; TU= ambient temperature
*** The relative dielectric constant of the medium to be detected must be greater than 1.5. (DC = dielectric constant)