Features at a Glance
- Analysis module integrated into M12 sensor connector
- Three configurable switching distances: 30/35/40 mm
- Easy to replace sensors with data storage feature
- Highly efficient with an average service life of 5 years
INTT313 Inductive Sensor for Extreme Temperature Ranges
Usually ready to ship in 15 days after order is received.
Added to Your Cart:
The high temperature inductive sensor with cable lengths of 1 to 30 meters can be positioned as needed in hot areas of systems and machines. Installation is also easy due to the ultra-compact design, as the analysis module is integrated into the M12 sensor connector. The sensor thus takes up far less space and is highly compatible thanks to its standardized design. The weproTec technology makes it possible to install the sensors directly next to or across from one another. In addition, sensor parameters like switching distance and output functions can be configured individually via IO-Link.
Inductive Data | |
|---|---|
| Switching Distance | 40 mm |
| Standard Target | 120 × 120 mm |
| Correction Factors Stainless Steel V2A/CuZn/Al | 1,10/0,65/0,58 |
| Mounting | Non-flush |
| Mounting A/B/C/D in mm | 60/120/80/20 |
| Mounting B1 in mm | 0...80 |
| Switching Hysteresis | < 10 % |
Electrical Data | |
|---|---|
| Supply Voltage | 10 ... 30 V DC |
| Supply Voltage with IO-Link | 18 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 15 mA |
| Switching Frequency | 50 Hz |
| Temperature Drift | < 10 % |
| Sensor head temperature range | -10 ... 250 °C |
| Temperature range of the plug | 0 ... 70 °C |
| Number of Switching Outputs | 2 |
| Switching Output Voltage Drop | < 1 V |
| Switching Output/Switching Current | 100 mA |
| Residual Current Switching Output | < 100 µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Interface | IO-Link V1.1 |
| Protection Class | III |
| Service Life (T = +200 °C) | 100,000 h |
| Service Life (T = +250 °C) | 60,000 h |
Mechanical Data | |
|---|---|
| Sensing face | Plastic, PEEK |
| Sensor head material | Stainless steel, V2A (1.4301 / 304) |
| Analysis module material | Brass, nickel-plated |
| Degree of protection, sensor head | IP65 |
| Degree of protection of the plug | IP65 |
| Connection | M12 × 1; 4-pin |
| Cable Length | 30 m |
| Cable Jacket Material | Plastic, PFA |
| Outer diameter cable | 3.4 mm |
| PWIS-free | yes |
| Weight | 1,560 g |
Safety-relevant Data | |
|---|---|
| MTTFd (EN ISO 13849-1) | 3,706.54 a |
Function | |
|---|---|
| Error Indicator | yes |
| Programmable switching distance | 30/35/40 mm |
Output | |
|---|---|
| Error Output | yes |
| PNP NC, PNP NO | yes |
Adjustable parameters | |
|---|---|
| Output |
Error Output Push-pull NPN PNP |
| Circuit |
NC NO NC+NO |
Standards and certificates |
|---|
|
|
Connection Diagram |
|---|
|
|
Mounting |
|---|
|
|
Ctrl. Panel |
|---|
|
01 = Switching Status Indicator
|
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Switching Status Indicator
|
Complementary Products |
|---|
|
ECAD data
Product Highlights
This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
