ZAI02EN02 Ethernet Connection Box

Available from stock

Added to Your Cart:

Added to your request list:

This connection allows simple connecting of up to 16 PNP sensors and actuators to an Industrial Ethernet network.

Features at a Glance

Technical data

Electrical Data
Supply Voltage	18 ... 32 V DC
Power consumption of device max.	0.1 A
Power consumption of system max.	1.8 A
Max. Switching Current Switching Outputs	2 A
max. total current of the digital I/O ports	9 A
Switching Output Voltage Drop	< 2.5 V
Temperature Range	-25 ... 60 °C
Sensor Supply Voltage (Pin 1)	200 mA
Inputs according to DIN EN 61131-2:2003	Type 2
Digital I/O ports short circuit protected	yes
Digital I/O ports overload protected	yes
Digital I/O ports reverse polarity protected	yes
Standard I/O-Pins	16
Baud Rate	10/100 Mbit/s
Transmission Mode	Full/Half Duplex
Switch Mode	Store & Forward
VLAN Prioritization	yes
Auto-Crossover	yes
Auto-Negotiating	yes
Auto-Polarity	yes
Interface	EtherNet/IP™
Protection Class	III

Mechanical Data
Material	Aluminum
Degree of Protection	IP67
Type of Connection Power	2 × 7/8", 5-pin
Type of Connection Industrial Ethernet Ports	2 × M12; 4-pin
Type of connection digital I/O ports	8 × M12; 4-pin
Weight	1,410 g