Sensor de distancia U18T001

Technical data

Ultrasonic Data
Working range, reflex sensor	50 ... 600 mm
Working range, through-beam sensor	50 ... 1,200 mm
Setting Range	50 ... 600 mm
Reproducibility maximum	1 mm
Linearity Deviation	2 mm
Resolution	1 mm
Ultrasonic Frequency	300 kHz
Service Life (T = +25 °C)	100,000 h
Switching Hysteresis	2 % *

Electrical Data
Supply Voltage	18 ... 30 V DC
Current Consumption (Ub = 24 V)	< 40 mA
Switching frequency, reflex sensor	9 Hz
Switching frequency, through-beam sensor	9 Hz
Response time, reflex sensor	56 ms
Response time, through-beam sensor	56 ms
Temperature Drift	< 1 %
Temperature Range	-30 ... 60 °C
Number of Switching Outputs	1
Switching Output Voltage Drop	< 2.5 V
Switching Output/Switching Current	100 mA
Analog Output	0...10 V
Synchronous Mode	Up to 32 sensors
Multiplex Mode	up to 16 sensors
Short Circuit Protection	yes
Reverse Polarity Protection	yes
Overload Protection	yes
Lockable	yes
Interface	IO-Link V1.1 Smart Sensor Profile
Data Storage	yes
Protection Class	III

Mechanical Data
Setting Method	IO-Link Teach input (for switching output) Teach-in (for switching output)
Housing Material	Stainless steel, V2A (1.4305 / 303)
Sensing face	Epoxy resin/glass bubble mixture Plastic, PBT Silicone
Degree of Protection	IP67
Connection	M12 × 1; 5-pin
Weight	38 g

Safety-relevant Data
MTTFd (EN ISO 13849-1)	1,193.85 a

Adjustable parameters
Circuit	NC NC/NO NO
All other parameters can be found in the product documentation.

Standards and certificates

* Relative to switching distance, at least 1 mm

Connection Diagram

Characteristic response curve
Characteristic curves show the position of the center of the measured object (100 × 100 mm plate) at the time of switching. Ob = Object Sc = Sonic cone width Standard sonic cone (center of the measured object) Extra-narrow sonic cone (center of the measured object) Standard sonic cone (front edge of the measured object)

Characteristic response curve
Characteristic curves show the position of the center of the measured object (Ø 25 mm rod) at the time of switching. Ob = Object Sc = Sonic cone width Standard sonic cone (center of the measured object) Extra-narrow sonic cone (center of the measured object)